Antec NSK 4000 II User Manual

Manual is about: Antec Inc Computer Hardware User's Manual

Summary of NSK 4000 II

  • Page 1

    Nsk 4000 ii / nsk 4480 ii / nsk 4480b ii user’s manual.

  • Page 2: Table of Contents

    Table of contents introduction 1.1 case specifications………………...……………......………….....… 2 1.2 diagram……………………………………………....…......…….....… 2 hardware installation guide 2.1 setting up……….…......…................................….................. 3 2.2 motherboard installation……………………………….......….....…....

  • Page 3: Disclaimer

    1 at antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illus...

  • Page 4: 1.1 Case  Specifications

    2 1.1 case specifications 1.2 diagram 1. 120mm rear tricool™ exhaust fan 2. Front 80mm fan slot (optional) 3. Motherboard mount: mini-itx, microatx or standard atx 4. Earthwatts 380w atx12v v2.2 power supply – nsk 4480 ii / nsk 4480b ii only 5. 3 x 5.25” external drive bays 6. 2 x 3.5” external driv...

  • Page 5: Hardware Installation Guide

    3 hardware installation guide this manual is not designed to cover cpu, ram, or expansion card installation. Please consult the motherboard manual for specific mounting instructions and troubleshooting. Before proceeding, check the manual for your cpu cooler to find out if there are steps you must t...

  • Page 6

    4 6. Connect the appropriate connector(s) from the power supply to the hard drive(s). 2.4 5.25” device installation there are three external 5.25” drive bays. 1. Looking from the rear of the case you can see metal grills covering the 5.25” drive bays. Carefully push a screwdriver through the metal g...

  • Page 7

    5 3.2 ac’97/hd audio ports there is an intel® standard 10-pin ac’97 connector and an intel® 10-pin hda (high definition audio) connector linked to the front panel of the case. Pin assignment for audio ports (hda and ac’97) pin signal names (hda) pin signal names (ac’97) 1 mic2 l 1 mic in 2 agnd 2 gn...

  • Page 8: Cooling System

    6 3.4 rewiring motherboard header connectors there may come a time when you need to reconfigure the pin- out of a motherboard header connector. Examples could be for your usb header, audio input header, or some other front panel connector such as the power button connector. Before performing any wor...

  • Page 9

    7 speed (rpm) input current air flow static pressure noise input power high 2000 0.24a (max.) 2.24 m³ / min (79 cfm) 2.54mm-h 2 o (0.10inch-h 2 o) 30 dba 2.9 w medium 1600 0.2a 1.59 m³ / min (56 cfm) 1.53mm-h 2 o (0.06inch-h 2 o) 28 dba 2.4 w low 1200 0.13a 1.1 m³ / min (39 cfm) 0.92mm-h 2 o (0.04in...

  • Page 10: Antec, Inc.

    Antec, inc. 47900 fremont blvd. Fremont, ca 94538 usa tel: 510-770-1200 fax: 510-770-1288 antec europe b.V. Stuttgartstraat 12 3047 as rotterdam the netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 customer support: us & canada 1-800-22antec customersupport@antec.Com europe +31 (0) 10 4...