Antec NSK 6000 User Manual

Summary of NSK 6000

  • Page 1

    New solution series nsk 6000, 6580 and 6580b user’s manual manuel de l’utilisateur anwenderhandbuch manuale per l’operatore manual del usuario পᡅ䂀ᯢ᳌.

  • Page 2: Disclaimer

    1 at antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illus...

  • Page 3

    2 2. Remove the screws from the right side panel. 3. There are two latches on the side panel. Slide the latches towards the front of the case and swing open the panel. 4. Inside the case you should see the power supply, some wiring with marked connectors (usb, pwr etc.), and installed i/o panel and ...

  • Page 4

    3 connecting the usb ports you will find a single 10-pin connector on a cable attached to the front usb ports. This is an intel standard connector, which is keyed so that it can’t be accidentally, reversed as long as it is connected to a proper intel standard motherboard header. Connect the 10-pin c...

  • Page 5

    4 connecting the audio ports (ac’97 and hda) there is an intel standard 10-pin ac’97 connector and an intel 10-pin hda (high definition audio) connector. You can connect either of them to your motherboard depending on the specification of the motherboard. See instruction below: note: please check yo...

  • Page 6

    5 grommets with the special screws provided. Note: don’t over-tighten the screws. Doing so will reduce the vibration and noise-dampening ability of the rubber grommets. 5. Slide and lock the tray back into the case. 6. Repeat the same procedure for the other devices as necessary. Note: if you choose...

  • Page 7

    6 note: the minimum voltage to start the fan is 5v. We recommend that our users to set the fan speed to high if you choose to connect the fan to a fan control device or to the fan-only connector found on some of antec’s power supplies. A fan-control device regulates the fan speed by varying the volt...

  • Page 8

    7 learn more about 80 plus®: 80 plus® is an innovative, electric utility-funded incentive program to integrate more energy-efficient power supplies into desktop computers and servers. The 80 plus performance specifications require power supplies in computers and servers to be 80% or greater energy e...

  • Page 9

    Antec, inc. 47900 fremont blvd. Fremont, ca 94538 usa tel: 510-770-1200 fax: 510-770-1288 antec europe b.V. Stuttgartstraat 12 3047 as rotterdam the netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 customer support: us & canada 1-800-22antec customersupport@antec.Com europe +31 (0) 10 4...