Performance tx1050b / 1088amg user's manual user’s manual.
2 at antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and ill...
3 3. Line up your motherboard with the standoff holes, and remember which holes are lined up. Not all motherboards will match with all the provided holes; this is normal, and won't affect functionally. (in other words, there will likely be extra holes.) 4. Remove your motherboard by lifting it up. 5...
Connecting the ieee 1394 (firewire®, i.Link®) port you will find a single 10-pin connector on a cable attached to the front ieee 1394 connection. This is an intel standard connector, which is keyed so that it can't be accidentally reversed as long as it is connected to a proper intel standard mother...
5 6. Rear right speaker out pin: connect the ret-r connector to this pin. 7. Rear left speaker out pin: connect ret-l connector to this pin. 3.5" device installation with the front bezel facing you, swing the front door out. You can see there are four 5.25" and two 3.5" external drive bays. Inside t...
Specifications: size: 120 x 120 x 25.4 mm rated voltage: dc 12v this case comes with two 80mm front fan mounts, one 80mm side panel fan mount for the vga card and one 92mm fan mount in the lower chassis air guide for the cpu. These are optional fan locations, to install fans please read the followin...
7 the fan duct down to the cpu. Note: lower the guide down as low as possible without touching the cpu cooler. This is the most common way to cool a cpu that comes with a stock cooler. Performance mode if you are a high performance user and you need extra cooling for your cpu. 1. Remove the side pan...
Antec, inc. 47900 fremont blvd. Fremont, ca 94538 tel: 510-770-1200 fax: 510-770-1288 antec europe b.V. Sydneystraat 33 3047 bp rotterdam the netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 technical support us & canada 1-800-22antec customersupport@antec.Com europe +31 (0) 10 462-2060...
