Anthem Audio Pre 1P Operating Manual

Summary of Pre 1P

  • Page 1

    2 7 9 0 b r i g h t o n r o a d , o a k v i l l e , o n t a r i o , c a n a d a l 6 h 5 t 4 t e l : ( 9 0 5 ) 8 2 9 - 3 8 3 8 f a x : ( 9 0 5 ) 8 2 9 - 3 0 3 3 s o n i c f r o n t i e r s c a n b e r e a c h e d 9 : 0 0 a m t o 6 : 0 0 p m ( e . S . T . ) o r 2 4 h o u r s a d a y b y f a c s i m i ...

  • Page 2

    We at sonic frontiers hope you will derive many years of listening pleasure with your new anthem pre 1p. This operating manual contains important information regard- ing the operation and care of the pre 1p. Be sure to read this manual carefully and follow these instructions in order to keep it perf...

  • Page 3

    C d e tachable iec ac pow er cord s ocke t plug the detachable power cord into this socket (see figure 4). The pre 1p is factory set for the correct operating voltage for the area in which it is sold (see shipping box for voltage setting). If a different operat- ing voltage is required, please conta...

  • Page 4

    Most phono cartridges are designed with a particular elec- trical load in mind to yield a smooth, overall flat frequency response. If the cartridge is incorrectly terminated into its intended load, frequency response errors of up to +/- 5 db or more may arise, causing a clearly audible effect. This ...

  • Page 5

    T r o u b l e s h o o t i n g if at any time the pre 1p fails to work properly, consult this checklist: 1. Check that the ac detachable power cord is plugged into the pre 1p detachable power cord socket (c) and is connected to a live source of ac power. For instance, if using a power bar, check that...

  • Page 6

    T e c h n i c a l s p e c i f i c a t i o n s (ac line set at 117v 60hz) frequency response phono input: ± 0.5db of riaa 20hz to 20khz harmonic distortion _0.25% @ 0.5v rms out i.M. Distortion (smpte) line output gain rms: 48db @ 1khz (250x) input impedance 47k / 100pf output impedance 520 ohms. Rec...