- DL manuals
- Anthony Gallo Acoustics
- Subwoofer
- Classico CLS-10
- Owner's Manual
Anthony Gallo Acoustics Classico CLS-10 Owner's Manual
Summary of Classico CLS-10
Page 1
Classico cls-10 / 12 subwoofer owner’s manual www.Roundsound.Com anthony gallo acoustics, 20841 prairie street, chatsworth, ca 91311 usa phone (818) 341-4488 • fax (818) 341-2188.
Page 2: Warning
Warning: to reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Objects filled with liquids, such a...
Page 3: Contents
Contents introduction welcome to the anthony gallo acoustics family! ...............................1 important safety instructions ..........................................................2-3 proprietary aga technology ..............................................................4 clc-10 / 12 sub...
Page 4
Copyright information copyright © 2012 anthony gallo acoustics. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of anthony gallo acoustics. Ii.
Page 5: Introduction
Introduction welcome! We’ve worked hard to fill this manual with useful information. Take a few minutes to read through it for easier system setup and better in-room sonic performance. The manual also will acquaint you with several unique features anthony gallo acoustics classico subwoofers offer th...
Page 6
Important safety precautions important safety instructions read and retain these instructions: all the safety instructions should be read before the product is operated. Keep them for later reference. Follow these instructions: all operating and use instructions should be followed. Water and moistur...
Page 7
Servicing: do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage requiring service: unplug this product from wall outlet and refer servicing to qualified personnel...
Page 8: Proprietary Aga Technology
Proprietary aga technology the classico series was designed from the outset to deliver the exceptional performance for which aga has become famous, yet to present a more traditional look. This makes it easy to incorporate our classico series in practically any environment. The unique technology used...
Page 9
Cls-10 / 12 subwoofer highlight features internal crossover bypass: lets you set the crossover for your satellite speakers in your preamplifier, surround sound receiver, or processor while bypassing the internal crossover in the cls-10 / 12. This method, detailed further in the manual, is ideal if y...
Page 10: Installation
Installation unpacking and inspection carefully inspect your new subwoofer immediately after unpacking. If you note any concerns or shipping damage, please contact your dealer. Do not plug in, install, or use your cls-10 / 12 if it appears damaged. Record the serial number found on the back of your ...
Page 11
Control settings and connecting your classico cls-10 / 12 caution: failure to turn off the receiver, surround sound processor/preamp or amplifier and unplug it from the power outlet before connecting your subwoofer may result in damage to your system. You should always turn off these components befo...
Page 12
Cls-10 / 12 subwoofer controls and connections level control - this knob matches the subwoofer’s output to that of the main speakers. Clockwise rotation increases the subwoofer output, counter-clockwise decreases it. You should only need to set this control once, after you’ve installed the cls-10 / ...
Page 13
Cls-10 / 12 subwoofer controls and connections line-in/line-out, speaker-in/speaker-out (or low-level/high-level connections) line level connections: these are the most commonly used inputs. If you have a contemporary surround sound receiver or processor, it will have outputs labeled “lfe” or “subwo...
Page 14
Cls-10 / 12 subwoofer controls and connections which can be far more demanding than the vast majority of musical recordings. As noted above, enter your receiver or surround processor setup menu and select small for the speakers. Then enter the bass-management section of the menu and set the crossove...
Page 15
Cls-10 / 12 subwoofer controls and connections the 100hz filter mentioned above allows bass management at speaker level. The built-in filter subtracts bass below 100hz from your satellite speakers and should be used if your receiver or amplifier lacks bass management and you don’t want to run the sa...
Page 16
Cls-10 / 12 subwoofer controls and connections the fuse blows again, disconnect the power cord from the ac wall supply and contact your local gallo acoustics dealer, or contact us directly. Dual subwoofer connections connection using high-level (speaker-wire) inputs: instead of running left and righ...
Page 17
Subwoofer placement (and potential domestic bliss) another important note: the following information and further placement and acoustic recommendations in this manual are based upon our desire for you to enjoy the best possible performance from your aga audio system. Of course, we realize that there...
Page 18
Subwoofer placement (and potential domestic bliss) general subwoofer placement recommendations (assuming a rectangular room): 1. Every boundary surface (wall, floor, etc.) directly next to which you put the sub results in more apparent bass in the room. Corner placement (three boundary surfaces) pro...
Page 19
Subwoofer placement (and potential domestic bliss) 5. As noted above, corner placement provides the most bass quantity, but generally at the expense of bass quality. A subwoofer placed near a wall (especially as outlined above) can often provide a reasonable balance of quantity and quality. Controls...
Page 20
Subwoofer placement (and potential domestic bliss) 2. Connect and place one subwoofer by moving your primary listening chair aside and placing the subwoofer exactly where you normally sit. (follow directions for connection, as outlined above.) 3. At a moderately loud level, play music or a video sou...
Page 21
Stereo review & chesky records: gold stereo and surround sound set-up disc (asin: b000003ghe) also, some thx™ dvds include test tones and other setup aids. Operation note: the classico subwoofers are designed to be self cooling as the air that moves in and out of the blast port passes over the ampli...
Page 22: Cls-10 / 12 Specifications
Cls-10 specifications frequency response: 19hz – 200hz +/-3db enclosure type: blast transmission line using patented s2 bass loading power: 300 watts rms, 600 watts maximum output amplifier design: high efficiency class d line level crossover in/out: bypass switch low pass: 50hz – 200hz continuously...
Page 23: Cls-10 / 12 Specifications
Warranty: 1 year parts and labor (extended to 2 years parts and labor with registration through an extended service agreement) documentation is necessary for us to determine the purchase authenticity of all aga products. Aga does not authorize any online reseller of any type to sell our products, ex...
Page 24
Gallo subwoofers are covered by a one-year limited warranty against defects in workmanship and manufacturing. In addition, we offer registered gallo owners a free one-year extended service agreement. In order to qualify for the extended service agreement you must fill out and return the warranty car...
Page 25: Service
If your subwoofer requires repair: 1. In the united states, contact us at 1-800-459-4183 or e-mail techsupport@roundsound.Com. If you purchased your classico subwoofer from an authorized gallo acoustics dealer outside the united states, please contact the dealer. It is necessary to have the original...