- DL manuals
- Anthony Gallo Acoustics
- Subwoofer
- TR-1D
- Owner's Manual
Anthony Gallo Acoustics TR-1D Owner's Manual
Summary of TR-1D
Page 1
Tr-1d/3d subwoofer owner’s manual www.Anthonygalloacoustics.Com anthony gallo acoustics, 20841 prairie street, chatsworth, ca 91311 usa phone (818) 341-4488 • fax (818) 341-2188.
Page 2: Warning
Warning: to reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Objects filled with liquids, such a...
Page 3
Copyright information copyright © 2012 anthony gallo acoustics. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of anthony gallo acoustics. Ii.
Page 4: Contents
Contents introduction welcome to the anthony gallo acoustics family! ...............................1 important safety instructions ..........................................................2-3 proprietary aga technology ..............................................................4 tr-1d/3d subwoo...
Page 5: Introduction
Introduction w elcome! We’ve worked hard to fill this manual with useful information. Take a few minutes to read through it for easier system setup and better in-room sonic performance. The manual also will acquaint you with several unique features anthony gallo acoustics subwoofers offer that typic...
Page 6
Important safety precautions important safety instructions read and retain these instructions: all the safety instructions should be read before the product is operated. Keep them for later reference. Follow these instructions: all operating and use instructions should be followed. Water and moistur...
Page 7
Servicing: do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage requiring service: unplug this product from wall outlet and refer servicing to qualified personnel...
Page 8: Proprietary Aga Technology
Proprietary aga technology the following unique technology used in these aga products was specifically developed by anthony gallo and cannot be found in any other subwoofers. This technology contributes to an enhanced level of bass output, precision bass reproduction, and dynamic range not found in ...
Page 9
Int ernal crossover bypass: lets you set the crossover for your satellite speakers in your preamplifier, surround-sound receiver, or processor while bypassing the internal crossover in the tr-1d and tr-3d. This method, detailed further in the manual, is ideal if you’re using compact speakers in your...
Page 10: Installation
Installation unpacking and inspection carefully inspect your new subwoofer immediately after unpacking. If you note any concerns or shipping damage, please contact your dealer. Do not plug in, install, or use your tr-1d / tr-3d if it appears damaged. Record the serial number found on the back of you...
Page 11
Control settings and connecting your tr-1d / tr-3d caution: failure to turn off the receiver, surround sound processor/preamp or amplifier and unplug it from the power outlet before connecting your subwoofer may result in damage to your system. You should always turn off these components before maki...
Page 12
Control settings and connecting your tr-1d / tr-3d level control: this knob matches the subwoofer’s output to that of the main speakers. Clockwise rotation increases the subwoofer output, counter-clockwise decreases it. You should only need to set this control once, after you’ve installed the tr-1d ...
Page 13
Control settings and connecting your tr-1d / tr-3d line-in/line-out, speaker-in/speaker-out (or low-level/high-level connections) line level connections: these are the most commonly used inputs. If you have a contemporary surround sound receiver or processor, it will have outputs labeled “lfe” or “s...
Page 14
Control settings and connecting your tr-1d / tr-3d for aga compact speakers such as the nucleus® micro or a’diva®, we recommend the crossover mode as described above. This minimizes the chances of overdriving them with movie special effects, which can be far more demanding than the vast majority of ...
Page 15
Control settings and connecting your tr-1d / tr-3d tr-1d / tr-3d’s built-in high pass 100hz crossover. Use care in this instance because you’ll be driving the satellite speakers full range, risking overdriving their woofers and/or clipping the amplifier. The 100hz filter mentioned above allows bass ...
Page 16
Fuse: this fuse protects the tr subwoofers from abnormal power conditions. It’s located under a small cover as part of the ac line cord socket. Use only a t2.5a 250v fuse when operating on 115v. Use only a t1.5a 250v fuse when operating on 230v. If replacement of the fuse does not solve the problem ...
Page 17
Subwoofer placement (and potential domestic bliss) another important note: the following information and further placement and acoustic recommendations in this manual are based upon our desire for you to enjoy the best possible performance from your aga audio system. Of course, we realize that there...
Page 18
Subwoofer placement (and potential domestic bliss) general subwoofer placement recommendations (assuming a rectangular room): 1. Every boundary surface (wall, floor, etc.) directly next to which you put the sub results in more apparent bass in the room. Corner placement (three boundary surfaces) pro...
Page 19
6. Placement inside a cabinet or cavity: since your aga subwoofer utilizes our patented s2 bass loading technology and is composed of an ultra-rigid cylindrical enclosure, you can place it inside of a cabinet or cavity and still achieve outstanding performance without the “muddy” or “boomy” bass tha...
Page 20
3. At a moderately loud level, play music or a video soundtrack with extended bass that is repetitive or continuous. 4. Walk around your room and note where the bass sounds good and where it sounds boomy or very quiet. Note that “good” does not necessarily mean “loudest.” good bass should be clear a...
Page 21: Tr-1D Specifications
Tr-1d specifications tr-1d specifications in room frequency response: 24hz to 180hz +/- 3db class d power amplifier: 200 watts rms, 400 w maximum output phase switch: 0/180 degrees active low pass crossover: 50 to 180hz, continuously variable with lfe by-pass switch high pass: 100hz fixed, 1st order...
Page 22: Tr-3D Specifications
Tr-3d specifications in room frequency response: 18hz to 180hz +/- 3db class d digital power amp: 300 watts rms, 600 watts maximum output phase switch: 0/180 degrees active low pass crossover: 50 to 180hz continuously variable with lfe by-pass switch high pass: 100hz fixed, 1st order on high-level o...
Page 23
Warranty and extended service agreement gallo subwoofers are covered by a one-year limited warranty against defects in workmanship and manufacturing. In addition, we offer registered gallo owners a free one-year extended service agreement. In order to qualify for the extended service agreement you m...
Page 24: Service
Service if your subwoofer requires repair: 1. Please contact the authorized local anthony gallo acoustics dealer from whom the product was originally purchased. It is necessary to have the original sales receipt available to confirm warranty eligibility. Most aga dealers can help you with problems a...