1. DL manuals
  2. ANTIFERENCE
  3. DVR
  4. Conexer DMHD01
  5. User Manual

ANTIFERENCE Conexer DMHD01 User Manual

Manual is about: DIGITAL MODULATOR AV TO DVB-T ENCODER/MODULATOR Antiference

Summary of Conexer DMHD01

  • Page 1

    User manual digital modulator dmhd01 av to dvb-t encoder/modulator.

  • Page 2

    Congratulations on your purchase of the dmhd01 this ‘state of the art’ product, is an hd encoder. The video input can be taken from hdmi, pc or component video. The audio can be taken from hdmi or analog audio. After compressing the video into h264 and audio in aac, the output can be configured as d...

  • Page 3

    1 safety considerations 1.1 connecting to the mains supply this product has to be connected to the mains supply. If there is the slightest doubt concerning the type of connection available on the installation, please contact your supplier of electricity. Before carrying out maintenance operation or ...

  • Page 4

    C1 power supply input of the modulator (5 vdc / 4 a) c2 usb input (for programming the dmhd01 by pc) c3 ethernet connection rj45 c4 rf input c5 rf output c6 hdmi input c7 component video input c8 pc input c9 analogue audio input a1 display t1 cancel/ return button t2 enter button t3 forward/down but...

  • Page 5

    3.2 powering up plug in the connector of the power supply. The display will show the conexer logo while booting. Once the modulator has booted correctly the main menu will appear. In the first line the model number is displayed (dmhd01) followed by the installed firmware version. When the modulator ...

  • Page 6

    3.3 - menu structure the dmhd01 has different menus allowing easy access to the different parameters and to change them when necessary. Below you will find the structure of the different menus: in order to go from one menu to the other use the move up/down ( and ) keys to select the menu options. Pr...

  • Page 7

    • set the output frequency • set the bandwidth • set the output level 7 dmhd01 4 setting up the dmhd1 4.1 - configuring the menu in this menu you can set up your dmhd01 as ip streamer, dvb-t modulator or dvb-c modulator. Select the appropriate option with the and buttons and press the enter button t...

  • Page 8

    4.2.1 setting the dvb-t parameters when you select the dvb-t and press the enter button, the following submenu appears. It allows you to set the dvb-t parameters. 4.2.2 setting the dvb-c parameters when you select the dvb-c and press the enter button, the following submenu appears. It allows you to ...

  • Page 9

    9 dmhd01 4.3 - the ip setting menu when your dmhd01is configured as ip streamer, then you can adjust the settings in the ip settings menu. • set the udp or rtp • set the udp port nr. 4.4 the av settings menu this menu allows you to configure which inputs should be used for the encoder and to adjust ...

  • Page 10

    4.4.2 changing the audio settings 4.5 the ts settings menu • set the nit version • set the network id. • set the original network id. • set the network name this menu allows you to adjust specific parameters of the transport stream. 10 dmhd01 ts settings.

  • Page 11

    4.6 the language menu select your preferred language in this menu. 4.7 default configuration when selecting this option, all your modifications will be lost and the default factory settings will be restored. • set the transport stream id. • set the programme id. • set the lcn id. • set the lcn numbe...

  • Page 12

    5 - programming using a pc the settings of the dmhd01 can also be changed using a pc. First, please install the software dmhdiface on your pc. You can download this software from our internet site www. Antiference.Co.Uk/conexer-hdmi-modulator and select the ‘ downloads’ tab. After installation of th...