Www.Antiference.Co.Uk.
User manual dvb-t2 digibox hd digital terrestrial television receiver.
Congratulations on your purchase of the dvbt-2 digibox this ‘state of the art’ product, is an hd encoder. The video and audio input can be taken from hdmi. After compressing the video into h264 and audio in aac or mpeg1-l2 the output can be configured as dvb-t signal. Stand alone configuration is ma...
7 5 - technical specifications 6 - declaration of conformity: we, antiference limited herewith declare that the dvbt-2 digibox complies with all essential requirements and any other applicable conditions set forth on directive 1999/05/ce. According to the weee (waste electrical and electronic equipm...
6 operating instructions installation guide after you have connected the digibox module, you can then follow the on-screen installation instructions. 1. For the first installation run, you can access the installation function by selecting the ‘ok’ button on the remote control and use the left, right...
1 safety considerations please read these instructions before use. 1.1 connecting to the mains supply this product has to be connected to the mains supply. If there is the slightest doubt concerning the type of connection available on the installation, please contact your supplier of electricity. Be...
1 aerial input 2 hdmi output 3 display ir 4 av output 5 power supply input (5 v/2 a) 6. Usb input (for updating the module by pc) 1 power 2 mute 3 zoom 4 epg 5 display information 6 audio language 7 recall 8 subtitle language 9 main menu 10 exit 11 up and down 12 confirm the highlighted menu item op...
5 4 - connection 4.1 - connecting to an aerial source. Connect to either a direct aerial source or a source from a digital modulator connected to an aerial, into the digibox receiver by attaching the aerial cable with f-type connector into the ant in port. 4.2 - connecting to a television connect th...
