ANTIFERENCE HDMI0108SV2 User Manual - page 5
of
7
2. Operation
1. Before the HDMI signal outputs, the splitter will read the EDID information of
the connected TVs and send it back to HDMI source.
2. This process determines the output mode/resolution.
3. Indicator led shows the working status
4. The splitter features 16 EDID options to select from. These can be selected
by the position of the EDID dip switches located on the front of the unit.
5. Details are in the table below:
Notes:
Copy - Reads the EDID of the display connected to output 1 only
MIX1 - Highest audio format, and lowest video format
MIX2 - Highest video format
MIX3 - Lowest video format