Antunes, AJ HEBT-3V Manual - Hebt-3V Bun Toaster
HEBT-3V BUN TOASTER
8
P/N 1011314 Rev. D 05/16
McDonald’s
Daily Cleaning
1. Turn the toaster off. The toaster enters a cool-
down mode and will automatically shut down
when complete.
NOTE: You do NOT need to wait for the cool down
to complete.
2. Put on heat-resistant gloves. Remove the front
and rear conveyor covers and the bun buffer.
(Figure 5).
3. Clean the outside surfaces of the toaster with
a paper towel dampened with KAY QSR Heavy
Duty Degreaser (HDD) solution. Be sure to
remove all debris from horizontal surfaces of
toaster. Allow to air dry.
4. Clean the front and rear Conveyor Covers and
Bun Buffer with a paper towel dampened with
KAY QSR Glass & Multi-Surface Cleaner. Wipe
with a clean sanitizer-soaked towel and allow to
air dry.
5. Inspect the belts for any tears, discoloration, or
damage to the Belt Wrap Snaps. Replace any
damaged Belt Wrap as needed. We recommend
changing all Belt Wraps quarterly. However, with
proper maintenance, the Belt Wraps can last six
months or longer.
6. If the belts are in good condition, spray a clean,
sanitizer-soaked towel with KAY SolidSense All
Purpose Super Concentrate (APSC). Wipe the
belts clean. Next, wipe the front belt with a clean,
sanitizer-soaked towel. Allow to air dry.
NOTE: The Belts will continue turning while in cool
down mode. You may need to repeat Step 6 more
than once to fully clean the belt wraps.
7. Reassemble the unit and return to operation.
MAINTENANCE
Figure 3.
Figure 4. Example of Damaged Belt
BELT IS TORN AND FOLDED.
REPLACE BELT.