E stat installation manual www.Electricunderfloorheating.Co.Uk before you begin installing read through these instructions carefully and check that you have all the components required..
Th232-af-230 400-232-003-b 2010-05-26 1/4 • one (1) thermostat • one (1) floor sensor • one (1) wall plate turn off power to the heating system at the main power panel to avoid electrical shock. Installation should be carried out by an electrician. All work must conform to the applicable country sta...
Th232-af-230 400-232-003-b 2010-05-26 2/4 this thermostat provides the following temperature control modes: display apply power to the thermostat at the main electrical panel. At power-up, the thermostat is in manual mode and displays the actual (measured) temperature. The setpoint temperature is 28...
Th232-af-230 400-232-003-b 2010-05-26 3/4 note: early start can be used in automatic mode only. When this function is set to on, the thermostat calculates the optimal time to start heating in order to obtain the desired temperature by the set time. The thermostat re-assesses the start time daily bas...
Th232-af-230 400-232-003-b 2010-05-26 4/4 customizing the schedule you can program the thermostat to use either 2 or 4 periods each day. For example, you can use 4 periods on weekdays and 2 periods on weekends. If you want to use 2 periods, choose periods “1 and 4” or periods “2 and 3”. Early start ...
