Summary of mpx
Page 1
Mpx user manual www.Audac.Eu.
Page 2
2.
Page 3: Index
3 index introduction 5 precautions 6 safety requirements 6 caution servicing 7 ec declaration of conformity 7 waste of electrical and electronic equipment (weee) 7 chapter 1: connections and connectors 8 connection standards 8 chapter 2: overview mpx 11 chapter 3: connecting & configuring the mpx 12...
Page 4
4.
Page 5: Introduction
5 introduction paging microphone for mtx the mpx microphones are specifically designed to be used in combination with the mtx multi-zone audio matrix system. They come in two different versions with four and eight zone selection buttons, offering a plug-and play solution for corresponding mtx matrix...
Page 6: Precautions
6 precautions read following instructions for your own safety • always keep these instructions for future reference. Never throw them away • always handle this unit with care • clean only with dry cloth • heed all warnings and follow all instructions • never expose this equipment to rain, moisture, ...
Page 7
7 caution - servicing this product contains no user serviceable parts. Refer all servicing to qualified service personnel. Do not perform any servicing (unless you are qualified to do so.) ec declaration of conformity this product conforms to all the essential requirements and further relevant speci...
Page 8
8.
Page 9: Chapter 1
9 chapter 1 connections and connectors connection standards the in- and output connections for audac audio equipment are performed corresponding to international wiring standards for professional audio equipment. Rj45 (rs485, audio, +24v dc): for connection to mtx matrix pin 1 white-orange not conne...
Page 10
10
Page 11: Chapter 2
11 chapter 2 overview mpx the front panel of the mpx contains various selectors and indicators. All selection buttons are implemented using capacitive touch principle, whereby selection is done by gliding your finger over it. A zone selection button with indicator led on top of it is provided for ev...
Page 12: Chapter 3
12 chapter 3 connecting & configuring the mpx depending the number of connected mpx paging microphones to one matrix, the connection and configuration should be done in an appropriate way. When only one mpx is connected to a system, it can simply be plugged and used without requiring any further con...
Page 13: Configuring The Mpx
13 2) connecting multiple mpx when multiple paging microphones are required in your system, cascading can be done by connecting them in parallel on the databus, and connecting it to the ‘paging’ rj45 connector on the mtx as shown in below diagram. The arj03p junction box can be used for easy connect...
Page 14: Chapter 4
14 chapter 4 technical specifications microphone type back elektret condenser polar pattern cardioid frequency response 50 hz - 16 khz sensitivity 45 db max. Spl 130 db power supply 24 v dc (from mtx) (15v minimal operation limit) power consumption 1.5 watt dimensions 221,5 x 43 x 111,6 mm microphon...
Page 15: Notes
15 notes.
Page 16: Notes
16 notes.