Audemars Piguet 2889 Instructions For Use Manual - page 11
40
41
Setting the time
On certain Royal Oak models, always unscrew
the crown before use.
Pull the crown to position
C
. You may now set
the time by winding in either direction without
risk of damaging the movement. Recommendation :
make sure to set the time precisely by carefully
moving the hands forward to the time desired.
Winding the watch
On certain Royal Oak models, always unscrew
the crown before use. The unscrewed crown will
automatically position itself at
B
.
Your watch is fitted with a mechanical hand-
wound movement.
We recommend that you rewind your watch
completely every two days at the same time (crown
in position
B
). Take great care not to overwind
(never force it when fully wound). Some models
are fitted with a torque limiter crown, which
rotates in the void when too much pressure is
applied.
On certain Royal Oak models, always screw
the crown back to position
A
to ensure water-
resistance.