Audemars Piguet 3120 Instruction manual - page 13
45
uSE
of fu
N
ct
Io
NS
seTTing The Time
on certain royal oak models, always unscrew the
crown before use.
Pull the crown to position
D
. it is advisable to
set the time clockwise and to adjust it precisely by
moving the hands forward carefully until you reach
the desired time.
warning : for watches with date display, do not
confuse noon and midnight as this will affect the
date change.
balance sTop when adJusTing hands
the balance and second hand stop simultaneously
when the winding crown is pulled out, allowing you
to set the time to within the second.
winding The waTch
on certain royal oak models, always unscrew
the crown before use. the unscrewed crown will
automatically position itself at
B
.
turn the crown at least 30 times (in position
B
)
to wind the watch. the movements of the wearer's
wrist will then activate the automatic system and
keep the watch running.
warning : the automatic winding system will not
work if the watch is not worn. the watch can then be
stopped before the 60 hours power reserve according
to its initial winding.
E
NGLISH
rapid daTe seTTing (cerTain models)
To avoid making any mistakes, it is recommended
to perform date changes when the mechanism is
not in operation, i.e. between 1.00 am in the
morning and 6.00 pm at the latest.
on certain royal oak models, always unscrew the
crown before use.
if the correct date is not displayed on the watch, pull
the crown to position
C
(rapid date correction) and
turn clockwise until the desired date is displayed.
on certain royal oak models, always screw the crown
back to position
A
to ensure water-resistance.