Audemars Piguet Calibre 2329 Instructions For Use Manual - page 9
34
35
3 Basic functions
Eng
lish
Setting the time
Pull the crown to position
C
. Time setting can
then be performed in either direction. It is
advisable to move past the time sought (by about
five minutes) and then to return to the correct
time to neutralise the set of toothed gears.
This setting process moves simultaneously the
hour and minute hands of the large and small dial
and the day / night indicator.
Time setting for the second
time zone
Pull the crown to position
B
. Position the
hour hand of the second time zone by turning
the crown, then push to crown to position
A
.
The hand will then automatically adopt the precise
position.
Caution : The night/day indicating hand follows
the second time zone only.
Watch indications (see figure)
1
Hour hand
2
Minute hand
3
Power reserve hand
4
Date change hand
5
Hands for second time zone
6
Day / night hand
Your watch is fitted with a three-position
crown :
A
Manual winding position
B
Time setting position for the second time
zone
C
Precise time and date setting position
Caution : Unfasten crown on Royal Oak
models to obtain the position
A
. After use,
it must be carefully screwed down again to
ensure water resistance.