Audemars Piguet Calibre 2385 Selfwinding Instructions For Use Manual - page 10
36
37
Winding the watch
On Royal Oak models, always unscrew the crown
before use. The unscrewed crown will automati-
cally position itself at
B
.
Turn the crown at least 30 times (in position
B
)
to wind the watch. The movements of the wearer's
wrist will activate the automatic system and keep
the watch running.
Warning : the watch must be worn to activate the
automatic system. If not, the automatic system
will not work and the watch will stop after about
two days.
Setting the time
On Royal Oak models, always unscrew the crown
before use.
Pull the crown to position
D
. You may now set the
time by winding in either direction without risk of
damaging the movement. Recommendation : make
sure to set the time precisely by carefully moving
the hands forward to the time desired.
Warning : For watches with date display, do not
confuse noon and midnight as this will affect the
date change.
Rapid date setting
To avoid making any mistakes, it is recommended
to perform date changes when the mechanism is
not in operation, i.e. between 1.00 am in the
morning and 6.00 pm at the latest.
On Royal Oak models, always unscrew the crown
before use.
If the correct date is not displayed on the
watch, pull the crown to position
C
(rapid date
correction) and turn clockwise until the desired
date is displayed.
On Royal Oak models, always screw the crown back
to position
A
to ensure water-resistance.
3. Basic functions
Eng
lis
h