Audemars Piguet dual time Instructions For Use Manual - page 10
35
uSE
of fu
N
ct
Io
NS
seTTing The Time
on certain royal oak models, always unscrew the
crown to access the different settings.
Pull the crown to position
D
. you may now set the
time by winding in either direction without risk of
damaging the movement. it is advisable to set the
hand five minutes past the desired time and then
to move it back to the exact time.this allows the
gears to re-align themselves, thus ensuring optimal
precision.
this setting process moves simultaneously the hour
and minute hands of the large and small dial and the
day/night indicator.
warning : do not confuse noon and midnight when
correcting the date.
on certain royal oak models, always screw the
crown back to position
A
to ensure water-resistance.
Balance sTop when adJusTing hands
the balance and second hand stop simultaneously
when the winding crown is pulled out, allowing you
to set the time to within the second.
winding The waTch
on certain royal oak models, always unscrew the
crown to access the different settings. the unscrewed
crown will automatically position itself at
B
.
turn the crown at least 30 times (in position
B
)
to wind the watch. the movements of the wearer's
wrist will then activate the automatic system and
keep the watch running.
warning : the automatic winding system will not
work if the watch is not worn. the watch can then be
stopped before the 38 hours power reserve according
to its initial winding.
on certain royal oak models, always screw the
crown back to position
A
to ensure water-resistance.
seTTing The Time of The second Time zone
Pull the crown to position
C
. Position the hour
hand of the second time zone by turning the crown,
then push to crown to position
B
. the hand will
then automatically adopt the precise position.
warning : the night/day indicating hand follows the
second time zone only.
on certain royal oak models, always screw the
crown back to position
A
to ensure water-resistance.
E
NGLISH