Audemars Piguet Royal Oak Carbon Concept2895 Instructions For Use Manual - page 13
50
51
4. Basic functions
Eng
lish
The linear minute counter
How do you read the linear minute counter?
This minute counter consists of a dedicated
indicator hand mounted on the counter spindle.
This hand takes 30 minutes to make one full
rotation. It also has a double vertical scale (tens
of minutes from 1 to 2; minute units from 0 to 9).
The elapsed minutes in the chronograph mode
are read off through dedicated openings on the
counter bridge. The elapsed time is indicated by
these openings shifting from white to black.
For instance :
0 or 30 minutes
19 minutes
25 minutes
Setting the time
When the crown selection indicator is in
position
H
, you can set your watch by moving its
hands forward or backward without risk of damage
to the mechanism.
Crown position indicator
Your watch features a hand indicating the position
of the crown.
The crown starts out in
Neutral (
N
)
position. It is screwed in and the
watch is running normally.
Unscrew the crown. Then:
Pull the crown into Position
R
: the
crown position indicator hand will
move into the
Rewinding position.
This is the proper position for
rewinding your watch.
Pull the crown into Position
H
:
the crown position indicator hand
will move into the
Time-setting
position.
This is the proper position for
setting the time.
Push the crown into Position
N
: the
crown position indicator hand will
move into the
Neutral position.
This will disconnect the crown.
To ensure that your watch will run properly, the
crown must be returned to
Neutral (
N
) position
once the proper adjustments have been completed.
You must also screw the crown back in to ensure
the watch's water resistance.