Audemars Piguet ROYAL OAK OFFSHORE DIVER Instructions For Use Manual - page 12
43
uSE
of fu
N
ct
Io
NS
seTTing The Time
unscrew the crown before use. the unscrewed crown
will automatically position itself at
B
.
Pull the crown to position
D
. it is advisable to
set the time clockwise and to adjust it precisely
by moving the hands forward carefully until you
reach the desired time. this compensates for the
hand-fitting play before returning the crown to
rewinding position
B
.
warning : do not confuse noon and midnight when
correcting the date.
balance sTop when adJusTing hands
the balance and second hand stop simultaneously
when the winding crown is pulled out, allowing you
to set the time to within the second.
rapid daTe seTTing
to avoid making any mistakes, it is recommended
to perform date changes when the mechanism is
not in operation, i.e. between 1.00 am in the morning
and 6.00 pm at the latest.
unscrew the crown before use.
if the correct date is not displayed on the watch, pull
the crown to position
C
(rapid date correction) and
turn clockwise until the desired date is displayed.
always screw the crown back to position
A
to
ensure water-resistance.
winding The waTch
unscrew the crown before use. the unscrewed crown
will automatically position itself at
B
.
turn the crown at least 30 times (in position
B
)
to wind the watch. the movements of the wearer's
wrist will then activate the automatic system and
keep the watch running.
warning : the automatic winding system will not
work if the watch is not worn. the watch can then be
stopped before the 60 hours power reserve according
to its initial winding.
E
NGLISH