Audicus ALTO Instruction Manual - Standby Mode
Other manuals for ALTO:
Instruction Manual
of
28
13
To Enter Standby Mode
The remote control’s buttons can be disabled temporarily to prevent any
unwanted commands. You can disable the remote when inside pocket.
Hold the Volume Up and Volume Down buttons at the same time.
The LED light will flash 3 red blinks.
To Exit Standby Mode
1. Hold the Volume Up and Down buttons at the same time.
The LED light will flash 3 green blinks.
2. You can restart the remote by sliding the Power Switch from ON to
OFF to ON.
Standby Mode
-
+
Volume Buttons