1. DL manuals
  2. Audio 2000
  3. Microphone system
  4. AWM6952U
  5. Owner's manual

Audio 2000 AWM6952U Owner's manual

Manual is about: PROFESSIONAL DUAL-POWER TWOCHANNEL UHF WIRELESS SYSTEM WITH 100 ADJUSTABLE FREQUENCIES

Summary of AWM6952U

  • Page 1

    ® thank you for purchasing the audio2000's professional dual-power two- channel uhf wireless system with 100 adjustable frequencies! For the best results and the utmost satisfaction from your new unit, please read this manual thoroughly, and retain it for future reference. Owner's manual awm6952u pr...

  • Page 2: Table

    Table of contents warning ........................................................................... 1 precautions ...................................................................... 1 package contents ............................................................ 2 quick setup ......................

  • Page 3: On Installation

    * unplug the unit from the wall outlet or set the master switch to off if it is not to be used for several days. * to disconnect the cord, pull it out by the plug. Never pull the cord itself. On installation * allow adequate air circulation to prevent internal heat build-up. Do not place the unit on...

  • Page 4: A. Remove Packing Material

    - 3 - a. Remove packing material b. Install the awr6952u receiver 1. Place the awr6952u receiver at a location at least 3.5 feet (1 meter) away from the ground and all the walls. Also, keep the awr6952u receiver away from any electro-magnetic noise sources as far as possible. 2. Mount both the anten...

  • Page 5: C. Set Up The Transmitters

    7. Turn both audio level adjustment knobs all the way to the minimal audio position. (note: the audio level adjustment knobs will be adjusted to its optimal position after the transmitters are turned on as discussed in the following section.) if the supplied 12vdc adapter is to be used as the power ...

  • Page 6: Features

    D. Setting up the awm6952u system 1. Adjust the volume control knobs on the awr6952u to the 12-o'clock position and adjust the mixer or the sound system, which is connected to the awr6952u microphone output, to have an optimal sound level. The awm6952u is now ready. 2. If more than one awm6952u syst...

  • Page 7: System Configurations

    9. Battery-level indicator on both receiver and transmitter 10. Automatic frequency scanning to select clear frequencies in the installation area 11. One 3.5mm stereo (trs) aux output on the rear panel 12. One 3.5mm stereo (trs) earphone output on the front panel 13. Two independent balanced xlr out...

  • Page 8: System Functions

    System functions system frequency configurations ● the awr6952u includes two channels which are channel a and channel b. Facing directly to the front panel, channel a is at the left side and channel b is at the right side. ● the frequency range for channel a is from 632.000 mhz to 646.975 mhz. This ...

  • Page 9

    1. Power on/off switch --- this is a three-position switch. When the battery power is to be used for the awr6952u receiver, turn this switch to the lower position (turn the switch downwards). When the power from the12vdc adaptor is to be used for the awr6952u receiver, turn this switch to the upper ...

  • Page 10: Awr6952U Lcd Display Panel

    13. Aux output --- this is a 3.5mmtrs (stereo) jack with a mono sound signal (meaning the tip, t, and the ring, r, of the stereo jack carrying the identical sound signal). 14. Balanced microphone outputs (xlr jacks) 15. Mixed ¼” microphone output “h/l” switch --- this switch needs to be set to the “...

  • Page 11

    23. Menu icons --- the menu icons include the following functions: (1) frequency, (2) sq, (3) name, (4) display, (5) auto search, (6) lock, (7) tune, and (8) ir. (1) channel - this menu icon is used to select the desired channel. (2) sq - this menu icon is used to adjust the receiver sensitivity. Hi...

  • Page 12: Handheld Wireless Microphone

    Handheld wireless microphone 28. Wireless handheld microphone windscreen 29. Wireless microphone body 30. Power led / mute led indicator 31. Power on/off & mute button— this button is to be used as a power on/off switch and as a mute button. When the power is off, press this button steadily to turn ...

  • Page 13: Channel Adjustment

    36. Power on/off & mute button -- - this button is to be used as a power on/off switch and as a mute button. When the body-pack transmitter power is off, press this button steadily to turn on the power and the green power led indicator will be turned on. While the power is on, press this button stea...

  • Page 14: Squelch (Sq) Adjustment

    1. The “channel” icon is used to select the desired channel. 2. In the main menu, press the “▲” or “▼” button to the “channel” icon. 3. When the “channel” icon is displayed, press the “set” button. After the “set” button is pressed, the channel number will start to blink. 4. While the channel number...

  • Page 15: System Lock

    Save. Once the “db” number is saved, the awr6952u will automatically exit to the main menu and the lcd display will show the previously selected “lcd display” menu function. 6. If the “db” number blinks 5 times, without pressing the “set” button, the awr6952u will exit to the main menu without savin...

  • Page 16: Frequency Scan

    Frequency scan 1. The “search” icon is used to automatically scan the surrounding area to select clear frequencies. 2. In the main menu, press the “▲” or “▼” button to the “auto search” icon. 3. When the “search” icon is displayed, press the “set” button. After the “set” button is pressed, the displ...

  • Page 17

    4. Then press the “▲” or “▼” button to increase or decrease the frequency by the step of 250 khz. When the “▲” or “▼” button is pressed continuously, the frequency will be increased or decreased in a fast manner until the button is released. When the upper limit or the lower limit of the frequency i...

  • Page 18: Setting Up & Debugging

    As shown in the above diagram, align the ir window of the awx6952u to the ir window of the awr6952u with a distance of less than four inches (10cm). The lcd screen will display “ir >>>”. When the frequency of the awx6952u is successfully set, the awr6952u will return to the main menu. Otherwise, the...

  • Page 19: Operation Notes

    1. The awx6952u, awx6952ug, awx6952uh, and awx6952um need to be turned off before changing the aa batteries. 2. Signal dropout or unexpected noise may be caused by a low battery or by an excessive distance between the transmitter and the receiver. If you encounter signal dropout or unexpected noise,...

  • Page 20: Awr6952U Receiver

    Awr6952u receiver awx6952u transmitter awm6952u system frequency range modulation mode oscillation mode deviation s/n ratio uhf fm vco + pll ± 45khz (compress-expand and automatic-volume- limit circuit) 30mhz total harmonic distortion >85db frequency response channel width 80 - 15,000 hz ( ± 3db) 11...

  • Page 21: Troubleshooting

    Should problems occur, they are, in many cases, due to simple operation mistakes or the like. On the basis of the following checks, you will be able to rectify a number of problems yourself without difficulty. If the problem cannot be remedied after the following checks, please consult your dealer. ...

  • Page 22

    Distorted sound problem loud noise from receiver only when the transmitter is off. Loud noise from receiver even when the transmitter is on. Low transmitter battery level. Possible causes interference signal at that frequency. Receiver is placed too close to an interference source, such as a compute...

  • Page 23: Service Information

    Service information shipping damage if the shipping carton is found to be damaged, notify the delivery company immediately. Save the damaged carton as evidence for the delivery company to inspect. It is the responsibility of the consignee to file a claim with the delivery company for any damage that...