Audio Alchemmy DDP-1 Owner's Manual - page 15
page 15
Once the installation of the driver is complete, you will see
the “Installation Complete” dialog box shown at right. Click
Next.
You will now see a “Completing the Digital Decoding
Devices Setup Wizard” dialog box. Click Finish and the
driver installation will be completed.
You will now need to select the DDP-1 as your computer’s
audio playback device. First, open your computer’s
Control Panel, click on “Hardware and Sound,” then click
on “Manage Audio Devices” (under “Sound”). You’ll see a
panel like the one at right, showing all the audio playback
devices you have connected.
Place the cursor over “Speakers/AudioAlchemy_Audio
2.0” until it is highlighted onscreen, then right-click.
Choose “Enable” to activate the USB connection to the
DDP-1. Choosing “Set as Default Communications
Device” will automatically default your computer’s audio
output to the DDP-1 whenever it is connected.