1. DL manuals
  2. Audio Analogue
  3. CD Player
  4. Maestro 192
  5. Owner's Manual

Audio Analogue Maestro 192 Owner's Manual

Manual is about: Audio Analogue Maestro CD Player Owner's Manual

Summary of Maestro 192

  • Page 1

    Audio analogue maestro cd player 192/24 current output dac owner’s manual manuale d’istruzioni manual rev1.3a.

  • Page 2

    2.

  • Page 3

    3 dear audiophile, congratulations and thank you for choosing maestro cd 192/24. You’re now the owner of a unit that establishes a new reference in the category of high-quality and high-versatility stereophonic products. Maestro cd 192/24 provides circuital solutions with no compromises and features...

  • Page 4

    4.

  • Page 5

    5 introduction audio analogue does not take any responsibilities in the following cases: whenever the operational procedures related to the use and the maintenance of the equipment as described in this manual are not respected. Whenever damages to the equipment occur because of fixing and modificati...

  • Page 6

    6 premessa audio analogue non accetta responsabilità nei casi in cui: le procedure operative di utilizzo e manutenzione dell’apparato descritte nel manuale non siano rispettate. I danni si verifichino in seguito a riparazioni o modifiche dell’apparato eseguite da personale non autorizzato o a seguit...

  • Page 7

    7 features refined power supply with two transformers (one toroidal) and eight separated set-up sections. High-performance 192khz/24bit d/a converter. Low-jitter, sample-rate converter. Analogical circuits with separated components. Highest-quality passive components; lowest-tolerance metallic-layer...

  • Page 8

    8 1 2 4 3 5 6 7 8 9 10 10 11 12 front panel 1) standby. When pressing this button you activate/deactivate standby mode. 2) standby indicator. Lights blue when standby mode is activated. Pled display is turned off. 3) vfd display. 4) cd tray. 5) ir receiver. 6) open. When pressing this button you ope...

  • Page 9

    9 back panel 1) s/pdif digital out. Digital out connector. 2) right out. Unbalanced right digital out connector. 3) right balanced out. Balanced right digital out connector. 4) left out. Unbalanced left digital out connector. 5) left balanced out. Balanced left digital out connector. 6) rs-232 seria...

  • Page 10

    10 remote control • play. By pressing this button, you start cd playback or interrupt/resume cd playback (pause). • stop. By pressing this button, you stop cd playback or open/close cd tray. • rew. By pressing this button during playback, you move to the previous cd track or, holding it down for a f...

  • Page 11

    11 unpacking and checking cd player package carefully open the package to avoid damaging the content. The package should contain: • 1 maestro cd 192/24 • 1 remote controller • 1 power cord • 2 aaa batteries (already placed in the remote controller) • 1 instruction manual if one of the items listed a...

  • Page 12

    12 notes on maestro cd 192/24 power plugging maestro cd 192/24 has to be plugged to the electric installation grounding link to guarantee user’s safety and maximize sound quality. Actually, the grounding link is the way to eliminate noise and dispersion: that’s why the power cord has the grounding p...

  • Page 13

    13 standby mode you can put maestro cd 192/24 in standby mode pressing either the “stby” button on the remote controller or the “standby” button on the front panel. When the cd player is in standby mode, only the microcontroller section is powered while the rest of the circuit is off, reducing power...

  • Page 14

    14 how to use the serial port maestro cd 192/24 is equipped with a standard rs-232 serial port. You may remotely control the cd player connecting it to a pc or a home-automation unit through this port. This feature allows you to integrate maestro cd 192/24 into a multi-room or house- automation syst...

  • Page 15

    15 specifications parameter measurement conditions value channels: - 2 maximum output voltage: unbalanced outs balanced outs frequency response: +0/-1db 2hz-22khz noise level: band limits 0hz-20khz signal/noise ratio: 22hz-22khz power requirements: - 230v 50-60hz or 115v 50-60hz power consumption: -...

  • Page 16

    16 troubleshooting symptom cause remedy power cord incorrectly plugged make sure the power cord is correctly plugged into the wall outlet display is off no sound burned-out fuses check fuses in the fuse panel (after unplugging the power cord from the wall outlet) above the iec inlet and replace them...

  • Page 17

    17 warning! All of our cd players may not be able to read some specific cd’s manufactured with a unique protection system against copying. If in doubt, please try to read the cd using a pc cd-rom drive. When the cd-rom drive is incapable of accessing the tracks on the cd, please do not play the cd i...

  • Page 18

    18 attention: your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a collection system for these products. Attenzione: il dispositivo è contrassegnato da questo simbolo, che segnala di non smaltire l...

  • Page 19

    19.

  • Page 20

    Audio analogue manufactured and distributed by: audio futura spa via maestri del lavoro 583 51015 monsummano terme (pt) italy tel. 0572 954513 fax 0572 958099 www.Audioanalogue.Com - info@audioanalogue.Com.