Audio Analogue Verdi Cento Owner's Manual - page 7
AUDIO FUTURA
AUDIO FUTURA
AUDIO FUTURA
AUDIO FUTURA
spa
Verdi Cento Integrated Amplifier
7 / 7
6.
Pre phono stage
Verdi cento has a pre Phono section able to treat both MC and
MM signals. You can easily set the Pre Phono Mode changing
the position of Jumpers on the board. We have chosen this
kind of Mode selection because it permits you to perform the
Pre Phono settings without increasing the track’s length and it
avoids the low level signal from the cartridge passing through
selectors.
7.
Functionality
Verdi Cento has a new set of functions that makes it very flexible. Besides the traditional
integrated functions it can be set in bypass mode to work as a Power Amplifier. Moreover, you
can change the “volume scale” of the integrated amplifier to match it with your loudspeaker’s
efficiency and have the best volume resolution. Four different scales are available including a
1dB step scale and a scale adjusted for high efficiency loudspeakers! Furthermore, the Verdi
Cento has the balance function as well.
All the components used are high quality and low tolerance. The Board that is often a
neglected “component” has been designed respecting all possible noise reduction techniques
especially for the current return parts and power supply traces.
8.
Technical Data
103 x 448 x 405 mm
Dimensions (Nota 1)
4,0 x 17,6 x 15,9 “
12,5 Kg
Weight
27,5 Lbs
Line Gain
4,6dB
Power Amp Gain
32,5dB
Phono Gain
60 dB (MM), 80 dB (MC)
Line Input impedance
40KOhm
Phono Input impedance
56KOhm (MM), 100Ohm (MC)
1W @ 0.03% THD + N
10W @ 0.05% THD + N
100W @ 0.15% THD + N
Power on 8Ohm load:
110W @ 0.16% THD + N
10W@0.04% THD + N
Power on 4Ohm load:
170W@0.3% THD + N
Frequency responce (Note 2)
150KHz
Vout: 80Vpp
Responce to a Square Signal (Note 4)
Rise time: 2.8uS
106.20 dB (A weighted)
Signal Noise Ratio (Note 3)
99.30dB (No filter)
Noise level (Nota 5)
-100dB
Inputs
1 Phono Input + 5 Unbalanced Input
Outputs
1 tape Out + 1 Pre/Mono Output
Notes:
Nota 1 - Height x Width x Depth
Nota 2 - Attenuation 0dB, -3dB band
Nota 3 - Attenuation: 0dB A weighted reffered to 8 Ohm load nominal power
Nota 4 - 8 Ohm load nominal power
Nota 5 - Band limits 0Hz-40kHz