AUDIO ELECTRONICS Super Amp MKII Operation Manual - Operation
OPERATION
10
THE BREAK-IN PERIOD
The tubes, capacitors and output transformers take approximately 100 hours of music playing to
fully settle in for peak performance. The Super Amp MKII will sound good when first out of the
box. After the first couple of hours you will notice increased depth and tighter bass. This break in
period is true with vacuum tube audio amplifiers as the tubes finish their “burn in” cycle in the
first 100 hours of use.
WARNING!
MAKE SURE THE COMPONENT IS UNPLUGGED FROM AC MAINS BEFORE SERVICING.
POWER REQUIREMENTS
The Super Amp MKII is designed to operate from house current mains. The design voltage is 115
VAC at 50/60 Hz. (Foreign units 230 VAC at 50/60 Hz.)
CABLES
The speaker cables from the output posts of the Super Amp MKII to the speaker system can be
any convenient length your set-up requires. Select speaker cables of sufficient size to preserve
the outstanding performance capabilities of your Super Amp MKII. Heavy gauge #16 wire is
suitable for distances up to 10 feet; #12 for 25 feet. Most audio dealers will have proper speaker
cable in stock for this purpose.