Audio En2 TX User Manual

Page of 4

Download

Bookmark us

User guide for the En2 TX Transmitter

Installing and removing batteries

To open the battery vault, slide the grip to the right. This will unlock it and the battery

can be placed inside with the positive end uppermost.

To close the battery vault, simply push gently down on the

flap until you hear a clicking sound. The transmitter is now

ready to use.

Switching the transmitter On and Off

To turn the transmitter on, simply slide the switch to the left. To turn it off, slide the

switch to the right.

Viewing the Main Menu

On the top of the transmitter, press and hold the navigation switch fro 2 seconds to

enter the menu.

The main menu will be displayed and will read from left to right:

EXIT> FREQUENCY>AF GAIN> OPTIONS> INFO>LOCK.

Accessing the Frequency option

After accessing the main menu, use the wheel to scroll to the Frequency option. Once

the frequency option is highlighted press the middle part of the wheel to view a range

of frequencies.

Slide grip to the right to

open the battery

compartment.

Switch.

Page 1
User guide for the en2 tx transmitter installing and removing batteries to open the battery vault, slide the grip to the right. This will unlock it and the battery can be placed inside with the positive end uppermost. To close the battery vault, simply push gently down on the flap until you hear a c...
Page 2
A range of frequencies will then be displayed. The desired frequency can be accessed by using the wheel to scroll to it. Then press the middle part of the wheel to select it. Once a frequency has been selected, the transmitter instantly goes back to the main menu. Af gain option after accessing the ...
Page 3
On selection of the brightness mode, scroll the wheel to scroll to select on of five brightness options. Once a brightness option has been selected, the transmitter will instantly go back to the options menu. Screen saver on selection of the screen saver mode, move the wheel to scroll between 4 scre...
Page 4
After accessing the main menu, use the wheel to scroll to the lock option. Once the lock option is highlighted, press the middle part of the wheel to view the options: no>yes. To choose to lock the transmitter, scroll using the wheel to the yes option. This will lock the transmitter. The transmitter...