Audio International VCP-011-MS-x Product Installation Manual - page 10
AUDIO INTERNATIONAL, INC.
2/99
10
Document #540156, Rev. IR, Model No.: VCP-011-MS-x
3.2 Video
Output
The VCP powers up to the output of NTSC. Press FORMAT on the front
panel of the player to change output standard between NTSC and PAL.
According to the OUTPUT SYSTEM setting, the color system of signals to
the monitor or video distribution system changes as follows:
Color system
of
input/playbac
k signals
OUTPUT
SYSTEM
Setting*
Output signals’
color systems
NTSC
NTSC
NTSC
PAL PAL
NTSC
NTSC
PAL
PAL PAL
NTSC
NTSC**
MESECAM
PAL SECAM
*Plays all versions of PAL, NTSC, & MESECAM
**Black and white pictures are obtained
4.0 Troubleshooting
Problem
Possible
Cause Solution
No sound/No picture
VCP-011-MS-x is improperly
installed
No video cassette in source
unit.
Verify 28 VDC power and
video input is present –
Check connections.
Insert video cassette in
source unit
Poor video quality
Poor video cassette quality.
Replace video cassette.
Black & White Picture
SECAM tape
Unit not SECAM compatible,
replace video cassette tape.
Contact Audio International, Inc., Systems Engineering at the address on the
front cover of this publication if problems persist or difficulty in installation is
encountered.