1. DL manuals
  2. Audio Note
  3. Amplifier
  4. M2 Phono
  5. Owner's Information

Audio Note M2 Phono Owner's Information

Other manuals for M2 Phono: Owner's Information
Manual is about: pre amplifier

Summary of M2 Phono

  • Page 1

    ! M2 phono ! Pre amplifier ! Ownerʼs information !.

  • Page 2

    1) important safety information 2) ce declaration of conformity disposal power requirements 3) introduction 4) overview 5) unpacking and installation 6) connection 7) operation 9) technical specifications 10) warranty information 11) contact information contents !.

  • Page 3

    Other safety precautions: - never touch the power cord with wet hands. Always remove the power cord by grasping the plug, not the cable. Never expose the unit to excessive heat or magnetism. Never let an inexperienced person repair or reassemble the unit. Never put anything, especially metal objects...

  • Page 4

    Power requirements power requirements for electrical equipment vary depending on your geographical location. Please ensure that your unit meets the power requirements in your area. The power requirement for your unit is marked on the serial number plate, located on the rear panel. If you are in doub...

  • Page 5

    Thank you for purchasing this audio note (uk) product. With the correct care it should give you many years of pleasure and enjoyment. Please take the time to read all of the information in this manual before connecting your new component to an electrical supply or your system, to ensure both your sa...

  • Page 6

    Congratulations on your purchase of the audio note (uk) m2 phono pre amplifier. It has been specifically engineered for sonic performance rather than technical specification, and fulfills all audio note (uk) level 2 criteria: - pure class a operation zero negative feedback single ended circuit topol...

  • Page 7

    Please take care when unpacking your m2 phono pre amplifier. Choose a clean, clear location to unpack your unit. Be aware that the pre amplifier is quite heavy; before attempting to unpack or lift the unit, check the weight and if necessary use more than one person so that it can be moved safely and...

  • Page 8

    Phono input the m2 phono is equipped with a high quality, valve, moving magnet (mm) phonostage. Connect the cables from your tonearm to the ʻphonoʼ socket inputs. If your turntable is equipped with a separate earth wire, connect this to the dedicated grounding / earth post, located next to the ʻfeed...

  • Page 9

    Operation once all the connections are completed and checked, ensure that the volume control is at the minimum setting (rotated all the way left). Ensure that all source components connected to the m2 phono pre amplifier are switched on. Source components should always be the first components to be ...

  • Page 10

    Bedding in the new amplifier requires about 200 hours of initial use (called “bedding in”) before the circuitry becomes stable and optimum performance is realized. As the amplifier “beds in” the sound will become increasingly smoother, detailed and open. Once the amplifier has “bedded in” a warm up ...

  • Page 11

    Technical specifications input impedance 100 kohms line 47 kohms phono input sensitivity 126mv for 1v output gain @ 1khz 23db line feedback off 17db line feedback on 60db phono feedback off 54db phono feedback on output impedance 5kohm feedback off 2.5kohm feedback on output noise (unweighted rms) t...

  • Page 12

    Audio note (uk) warrants this product to be free from defects in materials and workmanship for two years from the original date of purchase from an appointed audio note (uk) dealer, and agrees to cover the cost of parts and associated labour required to correct such defects, subject to terms & condi...

  • Page 13

    Audio note (uk) limited 25 montefiore road hove east sussex bn3 1rd united kingdom tel: +44 (0)1273 220 511 fax: +44 (0)1273 731 498 e-mail: info@audionote.Co.Uk contact information if in the future your audio note (uk) product requires servicing, or if you require technical support or have any ques...