1. DL manuals
  2. Audio Note
  3. Stereo System
  4. M8 RIAA
  5. Owner's Information

Audio Note M8 RIAA Owner's Information

Other manuals for M8 RIAA: Owner's Information
Manual is about: PHONO STAGE

Summary of M8 RIAA

  • Page 1

    M8 riaa owner’s information the m8 riaa is a level 5 riaa phono stage, developed for the best possible sonic performance rather than technical specifications. To this end, the m8 riaa incorporates thermionic valve technology to produce the most accurate sound possible and has been brought to maturit...

  • Page 2

    Technology it is well known to any audio circuit designer worth their salt that accurate reproduction of music relies entirely on the preservation of the purity of the incoming signal. It is therefore not a difficult step to make to realise that the complexity of the circuitry itself must be kept to...

  • Page 3

    Connections please ensure that the m8 riaa, the power amplifier and any source equipment is switched off before making any connections. Note: it is important that all connections are firm, secure and airtight; any oxidisation of the interconnects will result in loss of performance. Always use high q...

  • Page 4

    Using the m8 riaa once all the connections are completed and checked, make sure all power amplifiers are off and flip the mains rocker switch located on the back panel of the pre-amplifier to the 'on' position. The m8 riaa is a vacuum tube design and therefore requires about 45 seconds warm-up time....

  • Page 5

    Warranty and servicing audio note warrants that this product will be free from defects in materials and workmanship for one year from the original date of purchase from an appointed audio note dealer. The valves are warranted for three months. In the event that your audio note product requires servi...

  • Page 6

    Safety information heat: by the nature of vacuum tubes, this product generates high levels of heat. Adequate ventilation must be provided. Do not restrict the airflow through any of the ventilation slots or place the amplifier on any surface that may restrict airflow. Caution: the vacuum tubes and o...