Audio Note OTO Phono Owner's Information

Other manuals for OTO Phono: Owner's Information
Manual is about: NTEGRATED AMPLIFIER

Summary of OTO Phono

  • Page 1

    ! Oto phono ! Integrated amplifier ! Ownerʼs information !.

  • Page 2

    1) important safety information 2) ce declaration of conformity disposal power requirements 3) introduction 4) overview unpacking and installation 5) connection 6) operation 7) technical specifications 8) warranty information 9) contact information contents !.

  • Page 3

    Such replacement must only be carried out by a qualified service technician. Do not attempt to replace any fuses without first disconnecting the unit from the mains electricity supply. ! Important safety information ! Risk of shock or electrocution! Internal operating voltages are lethal! Do not rem...

  • Page 4

    Power requirements power requirements for electrical equipment vary depending on your geographical location. Please ensure that your unit meets the power requirements in your area. The power requirement for your unit is marked on the serial number plate, located on the rear panel. If you are in doub...

  • Page 5

    Thank you for purchasing this audio note (uk) product. With the correct care it should give you many years of pleasure and enjoyment. Please take the time to read all of the information in this manual before connecting your new component to an electrical supply or your system, to ensure both your sa...

  • Page 6

    Congratulations on your purchase of the audio note (uk) oto phono integrated amplifier. It is a push pull, pure class a valve design, offering an outstanding level of performance and value. It has been specifically engineered for sonic performance rather than technical specification, and fulfills al...

  • Page 7

    Phono input the oto phono is equipped with a high quality, valve, moving magnet (mm) phonostage. Connect the cables from your tonearm to the ʻphonoʼ socket inputs. If your turn table is equipped with a separate earth wire, connect this to the dedicated grounding / earth post, located next to the ʻph...

  • Page 8

    Once all the connections are completed and checked, ensure that the volume control is at the minimum setting (rotated all the way left). Turn on the amplifier by using the rocker switch located on the rear panel, above the iec mains inlet socket. The red front panel light should now be lit. The ampl...

  • Page 9

    Technical specifications input impedance input sensitivity maximum output channel balance valve compliment unit weight shipping weight (original packaging) unit dimensions shipping dimensions (original packaging) mains input mains fuse max. Power consumption note ! 100k ohm line level 47k ohm phono ...

  • Page 10

    Audio note (uk) warrants this product to be free from defects in materials and workmanship for two years from the original date of purchase from an appointed audio note (uk) dealer, and agrees to covers the cost of parts and associated labour required to correct such defects, subject to terms & cond...

  • Page 11

    Audio note (uk) limited 25 montefiore road hove east sussex bn3 1rd united kingdom tel: +44 (0)1273 220 511 fax: +44 (0)1273 731 498 e-mail: info@audionote.Co.Uk contact information if in the future your audio note (uk) product requires servicing, or if you require technical support or have any ques...