Audio Pole MIX-7 User Manual - Controls
Controls
Front
5. MONO – OUT
MONO output level setting.
6. L, R INDICATOR
Colored LEDs displaying the output LINE OUT (MASTER) level. The red LEDs (clip) indicate the presence
of saturation; then adjust the levels accordingly.
7. MASTER – OUT
Stereo LINE OUT level setting. When you turn ON/OFF the device, the level must be adjusted to zero.
8. SWITCH ON/OFF
ON / OFF power switch. The led lights when the power is on.
9. RACK-MOUNTABLE
Holes for 19’’ rack mounting.
3
5
Back
10. AC INPUT
Socket for connection of the mains cable, also contains the fuse compartment. Before any connection check
the mains voltage. When replacing the fuse, use a fuse with the same characteristics.
11. DC POWER 24V
Terminals for back up power supply 24 V DC. In the event of main power failures, the DC power takes over
automatically. When connecting, observe the correct polarity.
12. LINE OUT (MASTER)
Balanced stereo output, XLR.
13. MONO OUT
Unbalanced mono output, 6.35 mm Jack.
14. MIC OUT
Unbalanced, output 6.35 mm Jack, allocated exclusively to inputs 1 to 6 when the switch (3) is turned ON.
15. REC OUT
Unbalanced stereo output, RCA. Intended for recording.