Audio refinement the pre-5 & multi series... Owner information.
2 the remote control unit must be purchased separately recommendations page 6 functions page 4,5 care & use page 3,4 introduction design page 3 page 3 multi-3 ta b l e o f c o n t e n t s.
3 introduction do not handle your ac cord with wet hands. If liquid spills on your amplifier, unplug immediately and contact your dealer for cleaning instructions. To avoid damage to your amplifier, we recommend that you disconnect the ac during electri- cal storm or if the unit will be unused for a...
4 functions 1. Power (on/off switch): the color of the led on the front panel indicates the amplifier's status. Orange: power on, green: in remote, red: standby, dim out: power off on main ac switch. Please check if ac power cord is not inserted tightly enough when you find led has not lighted up by...
2. Right channel output: connect the loudspeaker cables to these terminals. It is very important that the positive (+) and negative (-) polarities are correct and that the cables are not touching. Use banana plugs in the ends of the terminals or connect bare wire into the hole in the terminal shaft ...
Recommendations for best sonic results, correct orientation of the ac plug is important. The prong with the red dot should be connected to the "hot" connection of your wall socket. Do not place unit on a glass shelf. If you really must, use "altuglass" on the shelf. We do highly recommend placement ...
