Model fm2260 wall mount full motion television wall mount.
2 introduction congratulations on the purchase of your new audio solutions fm2260 television wall mount. For maximum benefit, please read the entire manual before beginning installation. Note: this model has been designed to work with most 22 to 60 inch plasma, led and lcd televisions with a maximum...
3 opening the package the fm2260 wall mount and accompanying hardware have been carefully packed in a carton designed to protect it from transportation damage. After opening the carton, check that the components are in good condition and that all listed contents are included. Package contents wall p...
4 wall plate mounting hardware # part image description qty 1 square head screw 4 2 concrete anchor 4 3 m8 washer 8 4 m8 x 14 bolt 12 5 allen wrench 1 tv bracket assembly hardware # part image description qty a m4 x 12 bolt 4 b m5 x 12 bolt 4 c m6 x 12 bolt 4 d m8 x 16 bolt 4 e m4 x 30 bolt 4 f m5 x...
5 step 1 read and understand all of the enclosed instructions and verify that all parts are present and appear in good working order before you begin. Step 2 attach the wall plate to the wall. Use the included leveling tool to make sure the wall plate is level. Wood stud mounting the wall plate must...
6 installation step 3 after locating the mounting holes on the back of your television, choose mounting option 1, 2 or 3 and assemble the mounting bracket to fit your style of television (figure 3). • option 1: keep the connecting plate separate for attaching directly to the back of the television. ...
7 a b figure 5 - attach bracket to tv (option 2) a b figure 6 - attach bracket to tv (option 3) note: use the proper bolts and washers that correspond to the mounting holes on the back of the tv. Take care to tighten by hand first or damage to the mounting holes can occur. Some tvs without a flat ba...
8 note: you will need at least 2 people to finish this mounting procedure. To avoid possible injury, do not attempt to mount the tv alone. No! Yes! Figure 7 - two person install warning! Step 5 hang the pre-assembled tv unit on the wall plate (figure 8). Slide the connecting plate attached to your t...
9 step 6 note: angle adjustment should be done by at least two people. • (a) while another person is holding the television assembly, loosen the two handles on either side of the mounting plate and tilt the television up to 5 degrees back or 15 degrees forward. Tighten the handles when the desired a...
10 limited warranty audio solutions – audio mount – limited warranty – valid in the united states and canada this 60 month limited warranty is provided by metra electronics corporation for the metra product identified by the purchaser’s registration as indicated below, and there are no other warrant...
©2011 metra electronics corporation, 460 walker street, holly hill, fl 32117-2699 specifications are subject to change without notice. All trademarks are the property of their respective owners. Www.Audiosolutions.Com.
