Summary of ATH-CKR35BT
Page 1
User manual wireless headphones ath-ckr35bt.
Page 2: Introduction
1 thank you for purchasing this audio-technica product. Before using the product, please read through the quick start guide and caution guide, as well as this user manual when necessary, to ensure that you will use the product correctly. Although this product was designed to be used safely, failing ...
Page 3: Safety Precautions
2 safety precautions cautions for rechargeable battery the product is equipped with a rechargeable battery (lithium polymer battery). • if battery fluid gets into eyes, do not rub them. Rinse thoroughly with clean water such as tap water and consult a doctor immediately. • if battery fluid leaks, do...
Page 4: Notes On Use
3 notes on use • be sure to read the connected device’s user manual before use. • audio-technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product. • on public transportation or in other public places, keep the volume low s...
Page 5: Part Names and Functions
4 part names and functions ■ included accessories • usb charging cable (30 cm (1')) • eartips* (xs, s, m, l) • clip • pouch *at the time of purchase, the m-size eartips are attached to the main unit. Left/right (l/r) indicator bushing power supply/control button use to turn the power supply on/off, ...
Page 6: Charging The Battery
5 charging the battery • fully charge the battery when using for the first time. • when the rechargeable battery is running low, the product will sound 2 sets of 2 beeps through the headphones, and an indicator lamp will flash in red. When these beeps sound, charge the battery. • it takes about 3 ho...
Page 7: Connecting Via
6 connecting via bluetooth wireless technology about pairing pairing a bluetooth device to connect the product to a bluetooth device, the product needs to pair (register) with the device. Once they are paired, you do not need to pair them again. However, you will need to pair again in the following ...
Page 8: Using The Product
7 using the product the product can use bluetooth wireless technology to connect to your device and play music, receive phone calls, etc. Use the product for whichever of these purposes suits your needs. Note that audio-technica cannot guarantee the operation of displays, such as the battery level d...
Page 9: Using The Product
8 using the product listening to audio • to connect for the first time, pair the product and your device by bluetooth wireless technology. If you have already paired the product and your bluetooth device, turn on the bluetooth device’s bluetooth connection and turn on the product. • use your bluetoo...
Page 10: Using The Product
9 using the product reset function if the product does not work or other malfunctions occur, refer to “charging the battery” (p. 5) and connect the usb charging cable. Make sure the cable is carrying power. Disconnecting and then reconnecting the usb charging cable will reset the product and should ...
Page 11: Cleaning
10 cleaning get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners or other solvents for cleaning purposes. • to clean, wipe with a dry cloth. • natural oils from the skin are particularly likely to build up on the areas w...
Page 12: Eartips
11 eartips eartip size the product includes silicone eartips in 4 sizes (xs, s, m, and l). At the time of purchase, the m-size silicone eartips are attached. To ensure the best sound quality, select the eartip size that is best suited for you, and adjust the eartips inside your ears for a snug fit. ...
Page 13: Troubleshooting
12 troubleshooting problem solution power is not supplied. • charge the product. Unable to pair. • visit our website for information on compatible models. • confirm that the bluetooth device communicates using ver. 2.1+edr or higher. • place the product and the bluetooth device within 1 m (3.3') of ...
Page 14: Troubleshooting
13 troubleshooting sbc priority connections (measures for when sound is delayed significantly) when connected via aac codec, significant sound delays can be alleviated by changing the connection codec to the sbc codec, an audio compression format that comes standard with bluetooth devices.* 1 connec...
Page 15: Specifications
14 headphones type dynamic driver 9.8 mm sensitivity 102 db/mw frequency response 5 to 24,000 hz impedance 16 ohms microphone type electret condenser polar pattern omnidirectional sensitivity -44 db (1 v/pa, at 1 khz) frequency response 100 to 10,000 hz communication specifications communication sys...
Page 16
Ver.1 2017.07.10 138900960-02-01 audio-technica corporation 2-46-1 nishi-naruse, machida, tokyo 194-8666, japan ©2017 audio-technica corporation global support contact: www.At-globalsupport.Com.