B-Air VANTAGE LGR 2200 Manual - Setting Up Instructions

COMMERCIAL DEHUMIDIFIER

B-AIR.COM | 877.800.BAIR | WATER DAMAGE RESTORATION DIVISION

VANTAGE LGR 2200

DO NOT OBSTRUCT THE AIR INLET OR OUTLET.

Setting Up Instructions

Product Identification

Place dehumidifier in the upright position. When transporting a dehumidifier to site, allow 

the dehumidifier to stand for 30 minutes before switching ON. This is necessary to allow 

the refrigerant system to stabilize and avoid system damage.

Setting Up the Dehumidifier

Operate the dehumidifier in an enclosed area, as this creates a drying chamber. Close all 

doors, windows or areas that open to external areas, to maximize the dehumidifier’s 

water removal efficiency. Keep traffic through the drying chamber to minimum. Place the 

dehumidifier in the center of the room away from walls and furnishings. DO NOT allow the 

airflows to be obstructed.

Drainage

The dehumidifier pump connects to a plastic drainage hose. The hose is stored on the 

back of the appliance. Uncoil the entire hose ensuring there are no kinks or restrictions 

and place the unattached end to a water vessel or run to outdoors.

Ensure that water which runs to outdoors does NOT create a slip hazard.

Water vessels MUST be checked regularly where used.

Filter

Bolts for fixing the handle

Air inlet panel

Back panel

Front panel

Handle cover

Water pipe supporter

Wheels

Handle

Control panel

Power cord

Water outlet

NOTE: Please install the handle by yourself (six bolts are for your installation).

Air outlet hood

≥

≥

≥

≥

20

in

12in

32

in

12in

IMPORTANT

4

5

C

M

Y

CM

MY

CY

CMY

K

LGR_2200_MANUAL.pdf   3   8/24/16   12:56 PM