1. DL manuals
  2. B&B Electronics
  3. IP Access Controllers
  4. Access Converter/ 3
  5. Operation Manual

B&B Electronics Access Converter/ 3 Operation Manual

Summary of Access Converter/ 3

  • Page 1

    International headquarters b&b electronics 707 dayton road ottawa, il 61350 usa phone (815)433-5100 — general fax (815) 433-5105 email: support@bb-elec.Com website: www.Bb-elec.Com european headquarters b&b electronics westlink commercial park oranmore, co. Galway, ireland phone +353 91-792444 — fax...

  • Page 2

    Ii fcc radio frequency interference statement this equipment has been tested and found to comply with the limits for a class b computing device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operate...

  • Page 3

    6 safety certifications ul/cul: listed to safety of information technology equipment, including electrical business equipment. Ce: the products described herein comply with the council directive on electromagnetic compatibility (89/336/eec) and the council directive on electrical equipment designed ...

  • Page 4

    Iv notes: 5 specifications dc input voltage: ac adapter input load: 100/240 ±10% vac, 0.25a, 50/60 hz, 5 vdc output with maximum output current of 1a unit power consumption (typical): 600 ma @ 5 vdc operating temperature: 32° to 122° f (0° to 50° c) storage temperature: -4° to 158° f (-20° to 70° c)...

  • Page 5

    4 fiber uplink port the led indicator for the fiber uplink port is located on the rj-45 connector of the downlink port next to the power connector. There are four led functions for the fiber uplink port. The fiber uplink port led functions are as follows: • glows green when a link is established on ...

  • Page 6

    2 installing the access converter/3 install the access converter/3 as a table-top device, or mount to a wall surface with the appropriate bracket (included). To wall mount, use the supplied screws to attach the wall-mount bracket to the access converter/3, then simply mount the unit to the wall by t...