B&B Electronics IASW5P Quick Start Manual
IASW5P-0605qsg - 1/2
© 2004 by B&B Electronics. All rights reserved.
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com orders@bb-elec.com support@bb-elec.com
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445 www.bb-europe.com orders@bb-elec.com support@bb-europe.com
PRODUCT INFORMATION
B&B ELECTRONICS
Quick Start Guide
5-Port Industrial 10/100
Ethernet Switch
CE
Model IASW5P
Description
The IASW5P is an Industrial Ethernet switch. Switches have some advantages over hubs. For one, they remember
which node is which and route the traffic accordingly. Also full-duplex or two-way communications can be realized with
switches, making them more efficient than hubs.
This is no standard switch either, since the product is made for the unpredictable, industrial environment. It is housed in
a sturdy, compact ABS enclosure with options to be either panel or DIN rail mounted.
Connections are straight forward. Each port is designed to auto negotiate for speed and connectivity. No crossover
cables necessary. It will accept standard RJ45 UTP or STP cabling. Power supply is any unregulated 9-30 VDC source.
Diagnostic LEDs help troubleshooting and serve as a quick visual monitor. There is one red LED to indicate power.
Each port has two LED’s, an orange for speed and a green for link/activity.
Connections
Standard RJ45 female connectors are provided. Standard RJ45 plug cables are all that is necessary to connect your
devices to the unit since the switch supports auto crossover. External power supply is connected using the 2-position
pluggable terminal block. Power supply model 232PS4, 485PS4 or PS5R-A12 is required, not included.
RJ45 Pinouts
Pin Signal
1 TX+
2 TX-
3 RX+
4 not
used
5 not
used
6 RX-
7 not
used
8 not
used
Mechanical & Power Options
LED Indicators Summary
LED Color On
Off
Blinking
SPD orange 100 10
reset/error
LNK green link
no
link data
PWR red
power no
power NA
DIN OR PANEL
MOUNTABLE
SP
D
LN
K
Po
rt
1
Po
rt
2
Po
rt
3
Po
rt
4
Po
rt
5
/U
p
lin
k
PW
R
4.5 in
3.5 in
1.3 in
11.4 cm
8.9 cm
3.2 cm
LED Indicators
SPD
LNK
PWR
PLUGGABLE
TERMINAL
BLOCK
232PS4
485PS4
or
PS5R-A12
REQUIRED
(NOT INCLUDED)
12VDC@300MA
12VDC@300MA