B&B Electronics McBasic TP/FO Operation Manual

Summary of McBasic TP/FO

  • Page 1

    Mcbasic tp/fo operation manual ii fcc radio frequency interference statement this equipment has been tested and found to comply with the limits for a class b computing device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interferenc...

  • Page 2

    Iii table of contents fcc radio frequency interference statement .................................................... Ii limited lifetime warranty .................................................................................. Ii about the mcbasic ....................................................

  • Page 3

    2 linkloss and pulsing fiberalert linkloss and pulsing fiberalert are advanced troubleshooting features from b&b electronics that can help you locate “silent failures” on your network. It is vital that you understand exactly how pulsing fiberalert and linkloss work and how they will react in your ne...

  • Page 4

    4 pulsing fiberalert pulsing fiberalert minimizes the problems associated with the loss of one strand of fiber. If a strand is unavailable, the b&b electronics device at the receiver end notes the loss of link. The device will stop transmitting data and start sending link pulses. Until a valid link ...

  • Page 5

    6 installation troubleshooting • during installation, first test your fiber and twisted pair connections with all troubleshooting features disabled. Then enable these features, if desired, just before final installation. This will reduce the interference from features upon testing. • to test mcbasic...

  • Page 6

    8 dimensions: mcbasic tp/fo 1.68”h x 4.75”w x 4.95”d (4.3 cm x 12.1 cm x 12.6 cm) 9 fiber optic cleaning guidelines fiber optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, which can obstruct the optic path and cause performance degradation. Goo...

  • Page 7

    10 safety certifications ul/cul: listed to safety of information technology equipment, including electrical business equipment. Ce: the products described herein comply with the council directive on electromagnetic compatibility (89/336/eec) and the council directive on electrical equipment designed...