B&B Electronics Spectre RT3G-30xB1003 Quick Start Manual

Product Overview

SMA Antenna

connector

LEDs

3 V or 1.8 V

SIM card

readers

SMA Antenna

connector

Power

Ethernet

and/or

Aux ports

USB Port

I/O Port

The router will not work unless an antenna is attached, 

power is applied, and an activated SIM card is inserted.

Register your Jazz card

Powering the router with no antenna 

attached can damage the router

Use the following link: 

https://prepaid.jazzwirelessdata.com/prepaid/# 

If you have an existing account, please login and 

proceed to Step 2.

If you do not have an existing, account please 

click “Register” to create an account.

Enter your personal information and create a 

password. When entering your SIM card 

number(s), use the 19 digit number located on the 

bottom left of the card.  

Do not include the letter (F) at the end of the number. 

1

2

Digi-Key Sample SIM Activation Portal

Enter the activation code (key) 41295876.  Then 

press “Submit.”

Now check your email, where you will have 

received a link to complete activation. The link will 

send you to the login screen. Log in and proceed to 

Step 2.

Note: The “username” is the email address supplied 

during registration.  

To add additional SIM(s), click “Register SIMs”.  

The link is located at the bottom right corner of 

the table.

If you see red text, as shown in the screen 

captures below, please wait for the SIM card to 

fully register with JAZZ.  You may need to 

manually refresh the page.  

SIM Registration page shows red text