Summary of ESWP205-1SFP-T
Page 1
Eswp205-1sfp-t unmanaged five port ethernet switch user manual.
Page 2: International Headquarters
2 international headquarters b+b smartworx. 707 dayton road ottawa, il 61350 usa phone (815) 433-5100 -- general fax (815) 433-5105 website: www.Imcnetworks.Com support@bb-smartworx.Com european headquarters b+b smartworx westlink commercial park oranmore, co. Galway, ireland phone +353 91-792444 --...
Page 3
3 contents figures ........................................................................................................................................................................... 4 tables .......................................................................................................
Page 4
4 figures figure 1. Product description ........................................................................................................................................ 9 figure 2. Din rail mounting ................................................................................................
Page 5
5 radio frequency interference statement this equipment has been tested and found to comply with the limits for a class a computing device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in ...
Page 6
6 warranty effective for products of b+b smartworx shipped on or after may 1, 2013, b+b smartworx warrants that each such product shall be free from defects in material and workmanship for its lifetime. This limited lifetime warranty is applicable solely to the original user and is not transferable....
Page 7
7 contents of package the package includes: • b+b ethernet switch with attached din rail clip • printed quick start guide • 4-panel mounting clips with screws you may download the user manual at any time from the b+b smartworx web site: www.Imcnetworks.Com.
Page 8
8 product description the eswp205-1sfp-t is a plug-and-play, poe+, unmanaged, industrial ethernet switches with ip30 protection. It provides four 10/100mbps copper ports and one fiber sfp with 100mbps speed. The fiber sfp port can accommodate both single-mode and multi-mode fiber. This switch suppor...
Page 9
9 hardware figure 1. Product description led description led status description pwr (p1, p2) green on power applied green off no power 10/100 copper spd led green on 100mbps green off 10mbps 10/100 copper lnk led green on link green flashing activity green off not connected to network sfp led (l1) g...
Page 10
10 din rail mounting the din rail mounting clips are connected to the switch when shipped and ready to be mounted on a 35mm size din rail. Figure 2. Din rail mounting panel mounting figure 3. Panel mounting.
Page 11
11 rj45 ethernet connection all copper ports on the switch support the auto cross feature, which allows the end user to use a straight-through or cross over cable. Figure 4. Rj-45 connections.
Page 12
12 figure 5. Rj-45 connections 2 pin assignments pin# signal direction 10/100m description 1 out* poe & poe+ (alt-b) 2 out* 3 in* 4 v+ 5 v+ 6 in* 7 v- 8 v- table 2. Pin assignments.
Page 13
13 sfp installation and connection to connect the transceiver and fiber cable, follow the steps below. The sfp port is not proprietary. Any msa-compliant 100mbps fiber sfp can be installed in the port. (note: sfp modules typically offered in an lc fiber connector) first, insert the sfp transceiver i...
Page 14
14 figure 7. Lc connector to the transceiver last, remove the sfp. Gently pull out of the cage manually. Power input connections eswp205-1sfp-t accepts 24v~52vdc input voltage using terminal blocks. Figure 8. Power input connections.
Page 15
15 specifications interface rj-45 ports 4 x 10/100/1000baset, auto mdi/mdi-x poe pinout alternative b sfp sfp form factor for msa-compliant fast ethernet fiber led indicators p1 (power 1), p2 (power 2), l1 link/act (sfp port) leds rj-45 ports have 2 leds to indicate link/activity poe+ 2 ~4 - indicat...
Page 16
16 ce en61000-4-5 (surge) ce en61000-4-6 (cs) ce en61000-4-8 ce en61000-4-11 ce en61000-6-2 (industrial) free fall iec60068-2-32 shock iec60068-2-27 vibration iec60068-2-6 rohs, reach, weee ieee standards ieee 802.3 802.3. 10base-t ethernet ieee 802.3u 100base-tx and 100base-fx fast ethernet ieee 80...
Page 17
17 the products described here in comply with the council directive on electromagnetic compatibility (2004/108/ec) and the council directive on electrical equipment designed for use within certain voltage limits (2006/95/ec). Will be certified for information technology equipment including electrica...
Page 18
18 dimensional drawing figure 9: dimensional drawing.
Page 19
19 b+b smartworx technical support phone: 1-800-346-3119 (monday - friday, 7 am. To 5:30 pm. Cst) fax: 815-433-5109 email: support@bb-smartworx.Com web: www.Imcnetworks.Com.