1. DL manuals
  2. B+B SmartWorx
  3. Modem
  4. FOSTC
  5. Quick start manual

B+B SmartWorx FOSTC Quick start manual

Summary of FOSTC

  • Page 2

    Because rs-422 and rs-485 signals are also available on the same connector, take special care not to hook any external signals to these pins. This is not a problem for most serial devices, but a custom cable must be made that does not connect to the extra pins on the db25 connector if your device ha...

  • Page 3

    Before making modifications to the fostc, consult b+b smartworx’ free “rs-422/485 application note” or other sources of information to see if termination is necessary. Available at: www.Advantech-bb.Com rs-422 & rs-485 connections - continued rs-422/485 connection diagrams dip switch set up 5 the di...

  • Page 4

    Typical installation configuration 8 below is a university campus setup that illustrates the basic configuration of a typical fiber optic network. This scenario uses a combination of b+b smartworx fiber devices, including: 3 x model fostc serial/fiber converters, 2 x model fostdrp fiber repeaters, a...