B&C Technologies HP series Installation & Operation Manual - page 14

Installation

Inspection and Uncrating

13

Delivery inspection

Upon delivery, visually inspect crate, 

protective cover, and unit for any visible 

shipping damage. If the crate, protective 

cover, or unit are damaged or signs of 

possible damage are evident, have the 

carrier note the condition on the shipping 

document before the shipping receipt is 

signed, or advise the carrier of the 

conditions as soon as it is discovered.

Remove the crate and protective cover as 

soon after delivery as possible. if any 

damage is discovered upon removal of the 

crate and/or protective cover, advise the 

carrier and file a written claim immediately.

Customer Service

If literature or replacement parts are 

required contact the source from whom the 

machine was purchased or contact :

B&C Technologies

(850) 249-2222

(850) 249-2226 FAX

info@bandctech.com

www.bandctech.com

for the name of the nearest authorized parts 

distributor.

A record of each machine is on file with the 

manufacturer. The serial number decal is 

located at the rear of the machine.  Always 

provide the machine’s serial number and 

model number when ordering parts or 

when seeking technical assistance.

NOTE!

Keep the manuals, installation instructions 

and the wiring diagrams which accompany 

the machine in a safe place for ready 

reference. They have been included with 

the machine at no charge. Additional copies 

are available at a nominal charge.