B&G H5000 Quick Reference Manual
Race Display
Quick Reference Guide
MENU
1
2
3
2
4
Keys
1
Page key: Exit from menu system and return to last active page.Repeating presses: scroll
through the 5 data pages in rotation. Press and hold: save the current page configuration.
2
Arrow keys: Switch between upper/lower half of the display when changing variables.
Scroll through options. Increase/decrease values.
3
Enter key: Enter the selected menu option. Confirm change/selection.
4
MENU / Lights key: Enter the menu system. Repeating presses: scroll through the menu
options. Press and hold: enter the lights settings.
Display elements / symbols
11
3
1
7
6
9
10
8
12
13
3
1
4
2
5
2
No. Description
No. Description
1
Data variable / menu name
8
Alarm - Warning
2
Data value
9
Alarm - Info
3
Unit of measure
10
Controlling remote (HV) display
4
Bargraph data type
11
Autopilot engaged
5
Bargraph data
12
Active page number
6
The icon flashes when the Page key is
held to store a page configuration
13
B&G CPU on the network
7
Alarm - Critical
Backlighting
MENU
Press
and
hold
Race timer
Once the countdown timer reaches zero it will start counting up showing the elapsed time from
zero. The timer will continue to count until it is stopped.
SET the value of the timer
MENU
Once SET is selected, use the directional keys to set the required time (whole minutes only).
START the timer
If a time value is preset, the timer will countdown. If the timer is on zero it will count up.
MENU
Synchronize the timer
Synchronizing the timer will cause the timer to reset to the nearest whole minute.
STOP the timer.
¼
Note:
Press
Enter again to restart the timer.
EN
www.bandg.com
988-10636-001 - 1/5
x3