B&K Pro10 User Manual - page 9
Page
9
Back panel description
BALANCED
PREOUTS - For use with balanced output cables when your amplifier has balanced inputs.
The balanced outputs will help improve the quality of sound being reproduced
by the amplifier when there is a long run between the amplifier and the
preamplifier.
Balanced connector cable end
UNBALANCED
PREOUTS - Standard RCA outputs to connect patch cables to amplifiers.
RCA connector cable end
TAPE MONITOR
LOOP -
For connection of your tape recorder.
LINE LEVEL
INPUTS -
Line level inputs are for connecting your source components to the system.
(CD, Tape, Tuner,... etc.)
PHONO
INPUTS -
Phone inputs are for the connection of a turntable. These inputs are switchable
which allows them to be configured for a moving magnet or moving coil
cartridge.
Phono stage -
The phono stage of the PRO10 may be configured for either
Moving Magnet (MM) or Moving Coil (MC) applications with the
additional capability to set the resistive and capacitive loading of
the phono cartridge.
NOTE: Your PRO10 has already been configured for a MM
stage with a resistive loading of 50 Kohms and you need not
perform any modifications unless you so desire. To reconfigure
your PRO10, follow the appropriate procedure listed on page
10.