B&K Reference 200.1 Owner's Manual - Outputs

Other manuals for Reference 200.1: Specification Sheet
Manual is about: B&K Reference 200.1: User Guide

Summary of Reference 200.1

  • Page 1

    P/n13442 0702 b&k s b ! Imply etter b&k components, ltd. Reference 200.3 reference 200.2 reference 200.1 owner’s manual.

  • Page 2

    Ii b&k components, ltd., 2100 old union road, buffalo new york 14227-2725 phone 1-800-543-5252 or (716) 656-0026, fax (716) 656-1291 e-mail: info@bkcomp.Com web: www.Bkcomp.Com.

  • Page 3: Table of Contents

    Iii table of contents table of contents ....................................................................................................................................................Iii safety precautions ............................................................................................

  • Page 4: Safety Precautions

    1 safety precautions please read before installing warning: to prevent fire or shock hazard, do not expose this unit to rain or moisture. Care should be taken to prevent objects or liquid from entering the enclosure. Never handle the power cord with wet hands. • the lightning flash with arrowhead, w...

  • Page 5: Purpose and Function

    2 purpose and function the reference 200.3 (three channel), 200.2 (two channel) and 200.1 (mono) are high current power amplifiers that are designed for use in all types of audio or audio/video systems. Design and construction the reference 200.3, 200.2 and 200.1 amplifiers utilize high quality elec...

  • Page 6: Rear Panel

    3 rear panel 1 6 5 7 8 3 2 4 c a u t i o n r i s k o f e l e c t r i c s h o c k d o n o t o p e n r i s k o f e l e c t r i c s h o c k d o n o t o p e n fuse caution: for continued protection against risk of fire replace only with same type and rating. Control i/o channel 3 output channel 2 output...

  • Page 7: Level Adjustment

    4 level adjustment generally in a home theater application, volume level is controlled by the a/v surround processor. In a system for use with the reference 200.3, 200.2 or 200.1, adjustment of the volume level must be performed using the external preamplifier/processor. Inputs the reference 200.3, ...

  • Page 8: Rca Unbalanced Connections

    5 balanced or unbalanced connections shown below are typical preamplifier to amplifier connections: or rca unbalanced connections channel 1 input channel 2 input channel 3 input xlr (balanced) rca (unbalanced) xlr (balanced) rca (unbalanced) xlr (balanced) rca (unbalanced) rca input xlr input rca in...

  • Page 9: Outputs

    6 outputs five way binding posts are provided. There is one pair provided for each channel. They are designed to accept a banana-type plug, spade-lug connector (shown below), terminal posts, and bare wire, and they are color coded for easy identification. The positive (+) post should always be conne...

  • Page 10: System Installation

    7 system installation there will most likely be a number of cables involved in the installation of your home entertainment system. Preplanning is essential in order to maximize system efficiency. We recommend the following as a means of helping you reach that goal. Make a diagram of your proposed sy...

  • Page 11: Control Input and Output

    8 control input and output a control (trigger) system is provided on the reference 200.3, 200.2 and 200.1 amplifiers to allow remote switching of the amplifier’s standby on/off feature. The control input is designed to operate with a source (trigger) of 5-24 volts ac or dc. All b&k a/v processors an...

  • Page 12: Troubleshooting

    9 troubleshooting problem possible cause possible solution no sound (‘on’ led not illuminated) 1. Power cord not plugged in. 2. Power off at ac source. 3. Ac power inlet fuse blown or faulty 4. Control input not activated. 1. Reconnect power cord. 2. Check ac switch or fuse 3. Check for shorts or ov...

  • Page 13: Specifications

    10 specifications power rating: 8 ohms - ref 200.3/200.2/200.1 4 ohms - ref 200.3/200.2/200.1 220/220/250 watts @ 1 khz 325/350/400 watts @ 1 khz thd (s+n) 0.09 % @ 1 khz frequency response 5 hz – 45 khz input sensitivity rca unbalanced 1.4 volts input sensitivity xlr balanced 2.8 volts pin 1 = gnd,...

  • Page 14

    11 limited warranty b & k components ltd., referred to herein as b & k, warrants your b & k equipment against all defects in material and workmanship for a period of five years from the date of purchase. This warranty applies only to the original purchaser and only to equipment in normal residential...

  • Page 15: Rear Panel Enlarged Veiw

    12 rear panel enlarged veiw caution risk of electric shock do not open risk of electric shock do not open fuse caution: for continued protection against r isk of fire replace o nl y w ith same type and r ating. Control i/o channel 3 output channel 2 output channel 1 output plus + minus - plus + minu...

  • Page 16: Www.Bkcomp.Com

    Www.Bkcomp.Com b&k components, ltd. 2100 old union road buffalo, new york 14227 phone: 716 – 656 - 0026.