9500812-02 printed in the u.S.A. I nstallation instructions precision sport shifter 1997 and up c5 & c6 chevrolet corvette ©2006, 2005 by b&m racing and performance products this b&m precision sport shifter has been designed to work on most 1997 and up c5 & c6 corvette model vehicles. It has been en...
Tools socket(7, 10mm 7/16" 11/32" & 3/8") socket drive extension small flatblade screwdriver step 1. Pry up on rear of gear shift insert and remove. Tool: small flatblade screwdriver step 2. Remove small metal insert. Tool: vise grips channel locks t-15 & t-40 punch hammer c- 5 corvette disassembly ...
Step 3. Remove knob. Step 6. Remove panel next to ignition key (temperature sensor) and remove screw. Tools: small flatblade screwdriver, ratchet, extension & t-15 step 4. Remove traction control panel and disconnect all wires. Tool: small flatblade screwdriver step 5. Remove (2) retaining nuts and ...
C - 6 disassembly step 10. Remove panel for passenger air bag and remove module. Tools: small flatblade screwdriver step 8. Remove small inserts at rear of rear center console and remove (2) nuts. Tools: small flatblade screwdriver, ratchet, extension & t-15 step 9. Slide rear center console back en...
Step 11. Remove (1) nut holding down console. Tools: ratchet, extension & socket (10mm) step 12. Remove (4) bolts securing arm rest and remove arm rest. Tools: ratchet, extension & t-15 step 13. Remove (2) screws under passenger airbag panel. Tools: ratchet, extension & socket (7mm) step 14. Pull up...
Step 17. Lift leather boot out of console. Step 18. Remove screw securing knob and lift out front center console. Be sure to remove connector wires. Tool: ratchet, extension & t-20 step 16. Remove passenger side panel and lift up on front center console. Step 15. Remove (2) bolts holding down front ...
Step 21. Remove pivot cup from bottom of stock shifter. Tools: channel locks step 22. Install plastic pivot cup onto bottom of b&m shifter. Step 20. Remove (4) bolts securing shifter and remove from vehicle. Note: shifter shown out of car for clarity only. Step 19. Remove foam and (4) nuts securing ...
Step 24. Remove stock rubber bushings. Tool: small flatblade screwdriver step 25. Install bushing underneath housing as shown. Step 23. Remove bolts securing shifter base to vehicle. Tools: ratchet, extension & t-40 note: this step is not necesary on c-5 z06 model vehicles as it is already solid mou...
Step 27. Remove old rubber gasket completely and install new gasket. Tool: flathead screwdriver or gasket scraper step 29. Reinstall foam and (4) nuts securing rubber. Tools:ratchet, extension & socket (10mm) go to step 39 for c-5 assembly c-6 assembly step 30. Reinstall front center console and ins...
Step 31. Reinstall leather boot into console. Step 34. Reinstall sleeve around emergency brake. Step 32. Reinstall passenger side panel and lift up on front center console. Step 33. Reinstall (2) bolts holding down front center console. Tools: ratchet, extension & socket (7mm).
Step 38. Reinstall (4) bolts securing arm rest and. Tools: ratchet, extension & t-15 step 36. Reinstall (2) screws under passenger airbag panel. Tools: ratchet, extension & socket (7mm) step 37. Reinstall panel for passenger air bag and reinstall module. Tools: small flatblade screwdriver step 35. R...
C - 5 assembly step 39. Reinstall front center console and slide rear center console into place. Step 40. Reinstall (2) nuts and small inserts at rear of rear center console. Tools: small flatblade screwdriver ratchet, extension & socket (10mm) step 41. Reinstall bolts beside lighter and under ashtr...
Step 43. Reinstall (2) retaining nuts and wire connectors. Tools: socket(10 mm), drive, and extension. Step 44. Reinstall traction control panel and connect all wires. Tool: small flatblade screwdriver step 45. Reinstall knob. Step 46. Reinstall metal insert into knob and shift pattern indicator. To...
Manual shift knobs racing & performance products b&m's manual shift knobs are perfect when style and performance matter. Ergonomically correct and made from the highest grade materials, these sturdy knobs incorporate the latest styling as well as distinctive design. Each knob is designed to fit most...
