B'Twin Elops 940E User Manual - page 10
10
Battery self-assessment
The battery charge level can be checked by pressing the battery’s power supply button.
The charge level will not be displayed if the battery is fitted to the bicycle.
Unless you first remove the battery from the bicycle, all the LEDs will light up indicating only that the battery is turned on.
1% - 20%
21% - 40%
41% - 60%
61% - 80%
81% - 100%
Switching off the power supply
Emergency battery charging
0 %
Off
On
Flashing
If any other LED combination appears, go to page 15. The battery button is also used as an on/off switch for the electrical assistance and can be used to
start the bicycle by holding it down for a few seconds.
Precautions for use
+50°
Do not expose to temperatures exceeding 50°C.
< +10°C
+10°C / +50°C
> +50°C
+10°C
+25°C
Storage conditions: It is essential to store the battery charged and in a dry, cool place (between +10°C and
+25°C), out of sunlight.
< +10°C
+10°C / +25°C
Removal: Press firmly on the lever
of the mounting bracket while
sliding the screen out.
+10°C
+40°C
Charge your battery in a dry environment at a temperature of between +10°C and 40°C.
< +10°C
+10°C / +40°C
+40°C
Important: Under certain exceptional conditions, the controller may reach high temperatures.