B2 Audio Duo Owner's Manual - page 5

 Duo

GND (GROUND CONNECTION)

For connection to the chassis’ ground. 

For optimum performance 0 gauge cable is

recommended.

REM (REMOTE)

Connect to switched +12V from the head unit.

 +12V (POWER CONNECTION)

For connection to the positive terminal of the 

battery (+12). For optimum performance 

0 gauge cable is recommended.

5

POWER

SPEAKER

CH1

CH2

           BRIDGE           

B+

REM

GND

SPEAKER OUTPUTS

Amplifier connection to the loudspeakers.

Minimum speaker cable is 12 gauge.

Minimum impedance for the 

Duo 

is 1    stereo

or 2    mono.

Installation of the amplifier should be done

      in the folling steps:

1. Ensure that the ground is appropriate, then connect it to the amplifier.

2. Next step is to connect the +12V wire.

    This cable has to be fused at the battery for safety precautions.

3. The final step is connecting the switched remote.

CAUTION

2. Panel layout