Babeltop TPH-01 User Manual - page 4
4. Timer Mode
Press to enter Timer Mode, the acquiescent time is 23:59:59.
Under Timer mode, press SET to set the time according the following
order : hour, minute, second , and finish the setting by the help of ADJ
button.
Note:
(1) Under the state of SET, exit by pressing MODE or no pressing for
1 minute.
(2)After finishing the above setting, press to begin timing, the
current setting seconds begin to decline. When display 0 second, the
setting minute begin to decline, and also the hour begin to decline
when minute is 0. When time is 00:00:00, it will alarm for 1
minute.(if the current state is , 00:00:00 in the screen will flash.)
(3) During timing, repeat pressing , timing will stop or repeat. If
timing is stopped, press ADJ button to set 0.
5. Temperature Mode
Display the present environment temperature, press C/F button to
transfer between ℃ to ℉, measuring scope: 0℃-50℃ (32℉-122
℉), the accuracy up to 0.5℃.
6. Color light mode
Under the normal state, if the switch is “OFF” position, there is no