Baby Bear GK301 User Manual - page 10
waiting for the first time locating by GPS data.
(2) If the GPS LED (Blue) will be continuously in bright state after GPS locating. The GPS LED
will turn off if GPS can not be located within 5mins or if GPS successfully located more than
20sec. In this case, please bring the device to outdoors to power on and re-locate.
(3) After GPS LED (Blue) is continuously in bright state, please login in
www.smartgpstracking.net
Select “Login” , to login in platform by using IMEI no. of device, the defaulted password is
666666.
Notice: 1. The accomplishment of this function needs network support in your area, SIM card is required
to activate GPRS function.
2. For the first time to use this device, please wait for 2mins after power on, then login the
platform. Or else the platform may indicate
“ This account is not existed” .
10.2 Check Location
When entering into platform interface, users can check the device locations on “View location”.
(1) Green symbols flicker means GPS location, Blue symbols means LBS location and Grey
symbols means the device is off-line.
(2) “View location” interface will display the address details of device, type of locating, battery
strength, and footprints and so on.
After login the location service platform, the platform will display the real time GPS location info
and LBS location info. LBS location is cursory but GPS location is accurate. Most of the time,
PDF created with pdfFactory trial version